On Sat, 6 Oct 2007 14:51:26 +0100 "Jim Rayner" <[EMAIL PROTECTED]> wrote:
> Hi Antonio > > This code will need some rework for openezx, my original goal was to > make it usable for any > form of muxed AT device using any tty driver > Did you document also the behaviour on the wiki, didn't you? http://wiki.openezx.org/Mux_cli > It has been tested using a Siemens TC65 module from x86 using standard > serial driver > > It has not been tested on A780 or similar so it is likely to need some > attention > Is Harald aware of your work? OpenEZX will be more and more on the OpenMoko way so we should communicate and share as much as possible. If not, I will write on gsmd-devel about that, mentioning also the newer netmux driver Motorola uses in newer phones, maybe it will worth a look for OM (OMers lurking here, did you read? ;)). > All Motorola specific changes in the 27.010 protocol etc are within > #ifdefs as a first step to > make the mux more usable for non Moto devices. So to enable for > openezx define MOTOROLA_EZX > > I've included a readme and very simple test code in the gzip if you > want to try from x86. > The zip should allow you to build on pc without needing to place > patches and rebuild your > x86 kernel. > Still oops on x86 with MOTOROLA_EZX defined. > For completeness I've attached patches although they may not be that > useful. The patches are rough, I've just done a rudimentary diff > against the current trunk > ts0710_mux.* code. > > Jim > If we (read _not_me_ :)) manage to make it work well, we can think to use its non-muxed mode for gsmd for the time being, so to start doing b. (see previous messages). This will prevent us to have gps on a780, so it is not ideal. When gsmd will support muxed devices we will use also gps, still clumsy? Regards, Antonio -- Web site: http://www.studenti.unina.it/~ospite Public key: http://www.studenti.unina.it/~ospite/aopubkey.asc
pgpapOwgbgwWv.pgp
Description: PGP signature
