Hi All I thought I'd post some thoughts on things I'd love to see in 2.3, just in case the developers don't have enough on their plates ;).
Snapshots of iSCSI volumes as well as export control of those snapshots Bonding management, as well and better overall network management (jumbo frames on/off etc, set ip address, dns servers, gateway etc). Someone in the forums also mentioned an updated kernel for the new 3ware cards. Is there anything stopping you from _not_ compiling the 3ware driver in the kernel and just updating it as a module directly from the 3ware site like is done with other drivers? That would make support of newer cards easier for people running older versions too. Resizing of iSCSI volumes An "Update" button in the GUI that runs "conary updateall" When creating volumes, it seems to be a 2 step process, firstly you define the volume size and type, then you have to go back into the volume properties and setup access rights, could this be made into a flow on process so after you setup the volume size/type etc and press create, the next page you end up on is the new volumes properties. Possibly even jumping down to the authentication area of the page. The same could possibly be applied to the creation of a new physical volume, from there we should arrive at creation of logical volumes rather than back at the main volume page. I think that's it for now, I'll probably think of more as soon as I hit send. Thanks Dave
_______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
