Hi all I have the following setup OF 2.2.r1144-1-1 3Ware Escalade 9500S-8 3 X 250GB drives in raid 5 array 4 X 120GB drives in raid 5 array
My problems started after I added the third 250GB drive, and migrated from a mirror on the existing 2 X 250GB drives to a raid 5 array using all three. While the Openfiler GUI shows that /dev/sda is now 465.64GB, /dev/sda1 is still only 232.81GB. Running pvdisplay showed the same thing. I have tried running `pvresize --setphysicalvolumesize 465.64G /dev/sda1`, and this seems to increase the PV and VG sizes to the full capacity of the drive, however, if I create any volumes under the VG, they are unusable; however the one volume I did have on the disk when it was just a mirror is OK. Also running `pvresize /dev/sda1` will shrink the PV down to 232.81GB again. I'm not a Linux guru, so if anyone can help me on this. It would be much appreciated. Regards Frank _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
