Bill Pye wrote: > Hi all > > Well, that's a slight exaggeration. > > I did a conary updateall today (new kernel 2.6.19.3-0.1 installed) and, as > usual, the grub was set to boot from the single processor kernel. I changed > that to reboot from the smp kernel rebooted and it died just after rebboting > vmlinuz. I had a message on the bottom of the screen that said something > about int6 and what looked like some register details. > > I rebooted from the single processor version of that kernel, no problems. The > question (s) are, anyone else hit that a problem with that kernel and smp? > Can I get the details of the boot problem from and logs and if so which ones? > > OF is installed on a Tyan motherboard with a couple of AMD MPs and a 3ware > 9500s raid, any more info else needed just ask. >
Try booting SMP again and write down at least the last few lines of the error... BTW, are you booting off the 9500s? I know someone using a 9650SE with no probs, i.e booting SMP kernel, but their root is not on the 3ware. R. _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
