Thanks that should be a huge help! Our production resides on EMC FC equipment, this is going to be used for test systems and staging vmware esx systems, and also disk to disk back. I have read there are some issues with the DRS functionality of VMware ESX when using ISCSI and the at FC is more stable and faster method currently. However even in a non-production state it is still critical enough to warrant a support contract imho.
On 7/20/07, Rafiu Fakunle <[EMAIL PROTECTED]> wrote:
Aaron Stranberg wrote: > Hello All, > Starting to look more seriously at openfiler for non production use. non-production ? > Does any one have experience or even better a howto for congifuring > etherchannel between the openfiler server and a cisco gigabit switch, > also any specific recommendation on gigabit NIC choice that makes this > easier? Under the General tab, you have the option to create a bonded network interface. Also, look at this document: http://www.mjmwired.net/kernel/Documentation/networking/bonding.txt Good luck. R. > > Thanks > -Aaron > ------------------------------------------------------------------------ > > _______________________________________________ > Openfiler-users mailing list > [email protected] > https://lists.openfiler.com/mailman/listinfo/openfiler-users >
_______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
