Thanks a million sir. You have no idea, how happy I am to see the iscsi-ls output. This was tricky one, I would have never thought of MASK to be a problem. I understand that now and would setup my other nodes tomorrow and continue to configure Oracle cluster.
If you ever plan to visit India, Delhi, just let me know. Cheers !!!! On 10/17/07, Rafiu Fakunle <[EMAIL PROTECTED]> wrote: > > Abhayjeet Singh Grewal wrote: > > I have checked the initiator, I could not see anything wrong. > > > > These are test servers, if you could putty and see yourself it would be > > really helpfull > > https://61.246.5.203:446/ > > IP open filer: 61.246.5.203 > > user: root > > password: cdsfiler > > > > for racnode3 > > user: root > > password: centos > > > > Seems to be a netmask issue. Set netmask to 255.255.255.255 for each > node in openfiler network ACL. > > > [EMAIL PROTECTED] ~]# cat /proc/scsi/scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: Openfile Model: Virtual disk Rev: 0 > Type: Direct-Access ANSI SCSI revision: 04 > Host: scsi2 Channel: 00 Id: 00 Lun: 00 > Vendor: Openfile Model: Virtual disk Rev: 0 > Type: Direct-Access ANSI SCSI revision: 04 > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > Vendor: Openfile Model: Virtual disk Rev: 0 > Type: Direct-Access ANSI SCSI revision: 04 > Host: scsi3 Channel: 00 Id: 00 Lun: 00 > Vendor: Openfile Model: Virtual disk Rev: 0 > Type: Direct-Access ANSI SCSI revision: 04 > > R, > > > On 10/17/07, Rafiu Fakunle <[EMAIL PROTECTED]> wrote: > > > >> Abhayjeet Singh Grewal wrote: > >> > >>> [EMAIL PROTECTED] iet]# cat session > >>> tid:5 name:iqn.2006-01.com.openfiler:rac1.asm4 > >>> tid:4 name:iqn.2006-01.com.openfiler:rac1.asm3 > >>> tid:3 name:iqn.2006-01.com.openfiler:rac1.asm2 > >>> tid:2 name:iqn.2006-01.com.openfiler:rac1.asm1 > >>> tid:1 name:iqn.2006-01.com.openfiler:rac1.crs > >>> [EMAIL PROTECTED] iet]# cat volume > >>> tid:5 name:iqn.2006-01.com.openfiler:rac1.asm4 > >>> lun:0 state:0 iotype:fileio iomode:wt path:/dev/rac1/asm4 > >>> tid:4 name:iqn.2006-01.com.openfiler:rac1.asm3 > >>> lun:0 state:0 iotype:fileio iomode:wt path:/dev/rac1/asm3 > >>> tid:3 name:iqn.2006-01.com.openfiler:rac1.asm2 > >>> lun:0 state:0 iotype:fileio iomode:wt path:/dev/rac1/asm2 > >>> tid:2 name:iqn.2006-01.com.openfiler:rac1.asm1 > >>> lun:0 state:0 iotype:fileio iomode:wt path:/dev/rac1/asm1 > >>> tid:1 name:iqn.2006-01.com.openfiler:rac1.crs > >>> lun:0 state:0 iotype:fileio iomode:wt path:/dev/rac1/crs > >>> > >>> > >> All's well on the Openfiler target front. Check your initiator > settings. > >> > >> > >> R. > >> > >> > >>> On 10/17/07, Rafiu Fakunle <[EMAIL PROTECTED]> wrote: > >>> > >>> > >>>> Abhayjeet Singh Grewal wrote: > >>>> > >>>> > >>>> > >>>> > >>>>> Hi, > >>>>> I tried everything to best of knowledge and am not able to mount > iscsi > >>>>> device on client. Node connects to target and show connection > >>>>> > >>>>> > >>>> established > >>>> > >>>> > >>>>> but does nothing. In my administration page of openfiler evrything > is > >>>>> > >>>>> > >>>> good > >>>> > >>>> > >>>>> and status page for iscsi it show LV but under intitiator connection > >>>>> > >>>>> > >>>> shows > >>>> > >>>> > >>>>> nothing. I have given the dump of the things below. > >>>>> > >>>>> Please help me. > >>>>> > >>>>> > >>>>> > >>>>> > >>>> Pls show output of following commands: > >>>> > >>>> 1) cat /proc/net/iet/sessions > >>>> 2) cat /proc/net/iet/volumes > >>>> > >>>> > >>>> R. > >>>> > >>>> > >>>> > >>>> > >>>>> ----My Node Info --- > >>>>> > >>>>> [EMAIL PROTECTED] etc]# ifconfig > >>>>> eth1 Link encap:Ethernet HWaddr 00:19:5B:FD:14:E0 > >>>>> inet addr:192.168.2.82 Bcast:192.168.2.255 Mask: > >>>>> > >>>>> > >>>> 255.255.255.0 > >>>> > >>>> > >>>>> inet6 addr: fe80::219:5bff:fefd:14e0/64 Scope:Link > >>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > >>>>> RX packets:15928 errors:0 dropped:0 overruns:0 frame:0 > >>>>> TX packets:13635 errors:0 dropped:0 overruns:0 carrier:0 > >>>>> collisions:0 txqueuelen:1000 > >>>>> RX bytes:8249769 (7.8 MiB) TX bytes:2492548 (2.3 MiB) > >>>>> Interrupt:209 Base address:0xc00 > >>>>> > >>>>> lo Link encap:Local Loopback > >>>>> inet addr:127.0.0.1 Mask:255.0.0.0 > >>>>> inet6 addr: ::1/128 Scope:Host > >>>>> UP LOOPBACK RUNNING MTU:16436 Metric:1 > >>>>> RX packets:2917 errors:0 dropped:0 overruns:0 frame:0 > >>>>> TX packets:2917 errors:0 dropped:0 overruns:0 carrier:0 > >>>>> collisions:0 txqueuelen:0 > >>>>> RX bytes:4077067 (3.8 MiB) TX bytes:4077067 (3.8 MiB) > >>>>> > >>>>> > >>>>> [EMAIL PROTECTED] etc]# uname -ar > >>>>> Linux racnode3 2.6.9-42.ELsmp #1 SMP Sat Aug 12 09:39:11 CDT 2006 > i686 > >>>>> > >>>>> > >>>> i686 > >>>> > >>>> > >>>>> i386 GNU/Linux > >>>>> > >>>>> [EMAIL PROTECTED] etc]# vi iscsi.conf > >>>>> DiscoveryAddress=192.168.2.195 > >>>>> > >>>>> [EMAIL PROTECTED] etc]# service iscsi restart > >>>>> Searching for iscsi-based multipath maps > >>>>> Found 0 maps > >>>>> Stopping iscsid: [ OK ] > >>>>> Removing iscsi driver: [ OK ] > >>>>> Checking iscsi config: [ OK ] > >>>>> Loading iscsi driver: [ OK ] > >>>>> Starting iscsid: [ OK ] > >>>>> > >>>>> [EMAIL PROTECTED] etc]# iscsi-ls > >>>>> > >>>>> > >>>>> > >> > ******************************************************************************* > >> > >>>>> SFNet iSCSI Driver Version ...4:0.1.11-4(15-Jan-2007) > >>>>> > >>>>> > >>>>> > >> > ******************************************************************************* > >> > >>>>> [EMAIL PROTECTED] etc]#dmesg > >>>>> iscsi-sfnet: Loading iscsi_sfnet version 4:0.1.11-3 > >>>>> iscsi-sfnet: Control device major number 254 > >>>>> > >>>>> ----- My Openfiler Info ----- > >>>>> [EMAIL PROTECTED] etc]# ifconfig > >>>>> eth0 Link encap:Ethernet HWaddr 00:30:18:A2:A5:61 > >>>>> inet addr:192.168.2.195 Bcast:192.168.2.255 Mask: > >>>>> > >>>>> > >>>> 255.255.255.0 > >>>> > >>>> > >>>>> inet6 addr: fe80::230:18ff:fea2:a561/64 Scope:Link > >>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > >>>>> RX packets:11049 errors:0 dropped:0 overruns:0 frame:0 > >>>>> TX packets:5605 errors:0 dropped:0 overruns:0 carrier:0 > >>>>> collisions:0 txqueuelen:1000 > >>>>> RX bytes:7327206 (6.9 Mb) TX bytes:1102959 (1.0 Mb) > >>>>> Interrupt:17 Base address:0xc000 > >>>>> > >>>>> lo Link encap:Local Loopback > >>>>> inet addr:127.0.0.1 Mask:255.0.0.0 > >>>>> inet6 addr: ::1/128 Scope:Host > >>>>> UP LOOPBACK RUNNING MTU:16436 Metric:1 > >>>>> RX packets:95 errors:0 dropped:0 overruns:0 frame:0 > >>>>> TX packets:95 errors:0 dropped:0 overruns:0 carrier:0 > >>>>> collisions:0 txqueuelen:0 > >>>>> RX bytes:7400 (7.2 Kb) TX bytes:7400 (7.2 Kb) > >>>>> > >>>>> [EMAIL PROTECTED] etc]# uname -an > >>>>> Linux openfiler1 2.6.19.7-0.3.smp.gcc3.4.x86.i686 #1 SMP Thu Apr 12 > >>>>> > >>>>> > >>>> 02:16:08 > >>>> > >>>> > >>>>> EDT 2007 i686 i686 i386 GNU/Linux > >>>>> > >>>>> [EMAIL PROTECTED] etc]# netstat -an| grep ESTABLISHED > >>>>> tcp 0 0 192.168.2.195:3260 192.168.2.82:33340 > >>>>> ESTABLISHED > >>>>> tcp 827356 0 192.168.2.195:54729 38.100.0.20:80 > >>>>> ESTABLISHED > >>>>> tcp 0 52 ::ffff:192.168.2.195:22 ::ffff: > >>>>> > >>>>> > >>>> 192.168.2.:60068ESTABLISHED > >>>> > >>>> > >>>>> [EMAIL PROTECTED] etc]# lvscan > >>>>> ACTIVE '/dev/rac1/crs' [2.00 GB] inherit > >>>>> ACTIVE '/dev/rac1/asm1' [115.94 GB] inherit > >>>>> ACTIVE '/dev/rac1/asm2' [115.94 GB] inherit > >>>>> ACTIVE '/dev/rac1/asm3' [115.94 GB] inherit > >>>>> ACTIVE '/dev/rac1/asm4' [115.94 GB] inherit > >>>>> > >>>>> [EMAIL PROTECTED] etc]# vi iscsid.conf > >>>>> # > >>>>> # Open-iSCSI default configuration. > >>>>> # Could be located at /etc/iscsid.conf or ~/.iscsid.conf > >>>>> # > >>>>> > >>>>> node.active_cnx = 1 > >>>>> node.startup = automatic > >>>>> > >>>>> #node.session.auth.username = abhay > >>>>> #node.session.auth.password = abhay > >>>>> > >>>>> node.session.timeo.replacement_timeout = 0 > >>>>> node.session.err_timeo.abort_timeout = 10 > >>>>> node.session.err_timeo.reset_timeout = 30 > >>>>> node.session.iscsi.InitialR2T = No > >>>>> node.session.iscsi.ImmediateData = Yes > >>>>> node.session.iscsi.FirstBurstLength = 262144 > >>>>> node.session.iscsi.MaxBurstLength = 16776192 > >>>>> node.session.iscsi.DefaultTime2Wait = 0 > >>>>> node.session.iscsi.DefaultTime2Retain = 0 > >>>>> node.session.iscsi.MaxConnections = 0 > >>>>> node.cnx[0].iscsi.HeaderDigest = None > >>>>> node.cnx[0].iscsi.DataDigest = None > >>>>> node.cnx[0].iscsi.MaxRecvDataSegmentLength = 65536 > >>>>> #discovery.sendtargets.auth.authmethod = CHAP > >>>>> #discovery.sendtargets.auth.username = dima > >>>>> #discovery.sendtargets.auth.password = aloha > >>>>> > >>>>> [EMAIL PROTECTED] etc]# vi initiators.allow > >>>>> iqn.2006-01.com.openfiler:rac1.crs 192.168.2.26/24, 192.168.2.72/24, > >>>>> 192.168.2.82/24 > >>>>> iqn.2006-01.com.openfiler:rac1.asm1 192.168.2.26/24, 192.168.2.72/24 > , > >>>>> 192.168.2.82/24 > >>>>> iqn.2006-01.com.openfiler:rac1.asm2 192.168.2.26/24, 192.168.2.72/24 > , > >>>>> 192.168.2.82/24 > >>>>> iqn.2006-01.com.openfiler:rac1.asm3 192.168.2.26/24, 192.168.2.72/24 > , > >>>>> 192.168.2.82/24 > >>>>> iqn.2006-01.com.openfiler:rac1.asm4 192.168.2.26/24, 192.168.2.72/24 > , > >>>>> 192.168.2.82/24 > >>>>> > >>>>> > >>>>> Regards, > >>>>> > >>>>> Abhay Grewal > >>>>> > >>>>> > >>>>> > >>>>> > >> > ------------------------------------------------------------------------ > >> > >>>>> _______________________________________________ > >>>>> Openfiler-users mailing list > >>>>> [email protected] > >>>>> https://lists.openfiler.com/mailman/listinfo/openfiler-users > >>>>> > >>>>> > >>>>> > >>> > >> > > > > > > > > -- Regards, Abhayjeet Singh Grewal V.P. Business Development Core Database Systems Pvt. Ltd. Cell: +91.99103.11114 www.coredbsystems.com
_______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
