[OF-users] (no subject)

[reg_taman]

Title: Flashmail

Hello,

 

I’m using OF 2.2, and I’m having a problem getting OF to detect one of my ethernet cards.

 

I have 3 NICs on my PC : an on-board ethernet controller (Realtek 8111C), and 2 D-Link DGE-528T ethernet cards. During installation, OF picked up the on-board controller (as eth0), plus one of the D-Link cards (as eth1). It’s rather strange that the 2^nd D-Link card was not detected, seeing as it’s exactly the same model as the other one. Anyway, the on-board controller isn’t working properly (I suspect that’s because there is no Linux driver for it), but that doesn’t matter too much, as I really wanted to use the 2 D-Link cards (one for the public network, the other one for a private network).

 

My question is – how can I now (i.e. after having done the installation) configure the network to include the 2^nd D-link ethernet card. If it was a full version of Red Hat Linux, for example, I could have used a GUI tool called system-config-network, but unfortunately the latter doesn’t exist on the version of Linux that comes with OF.

 

I’d be most grateful for any ideas on that subject.

 

Regards,

 

            Reg TAMAN

 

_______________________________________________
Openfiler-users mailing list
Openfiler-users@lists.openfiler.com
https://lists.openfiler.com/mailman/listinfo/openfiler-users