Ian,

 

With a couple outside exceptions (such as online capacity expansion if
you've got a HW RAID controller), pretty much everything is handled via the
GUI.  There is no need to use pvcreate, vgcreate, or any of the other LVM
tools.

 

Via the GUI you would need to create physical volumes on your disks then
create a volume group and add those disks to it.  From there you can use the
"Add Volumes" screen to add ext3, XFS, and iSCSI volumes (2.2 has some other
options that are no longer available in 2.3).

 

Jason Litka | Xoxide, Inc.

Manager, IT & Software Development

P: (610) 251-1672 x200

F: (610) 251-0263

 

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Davis
Sent: Friday, July 18, 2008 9:56 AM
To: [EMAIL PROTECTED]
Cc: [email protected]
Subject: Re: [OF-users] Documentation

 

I'm two days into Openfiler and am confused by a thing or two.  I find
myself configuring things by hand instead of using the GUI.  I expected to
be able to set everything up in the GUI and not go to the command line.  For
example, after initial install I have to go to the command line to use
pvcreate and vgcreate.  The GUI provided no way to do that.

Another was the NFS configuration.  It wouldn't let me configure anything
about the NFS share.  I had to go into /etc/exports and create the entry.
I'm fine on the command line, but I don't want anything to get overwritten
by some process from the GUI.

On Fri, Jul 18, 2008 at 9:37 AM, Ian <[EMAIL PROTECTED]> wrote:

You beat me to it by a second! I was about to hit send, and then I saw you
say the exact same thing. I have a few neglected OS projects of my own...
ah, to have the time to write documentation....

Beste,

Ian


Patrick Donker wrote:

Mike Davis wrote:

Isn't that kind of bizarre to not have any documentation to an open source
project?

Is Openfiler still in active development or is it a dead project?

On Fri, Jul 18, 2008 at 2:33 AM, Patrick Donker <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:

   Mike Davis wrote:

       Is there any documentation for this project that is current?
        I'm not talking about the 90 dollar admin guide.

       Mike

   Nothing official, only findings of other users.



Wouldnt the correct question be, isnt that typical for an open source
project ;)

_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users

_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users

 

_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users

Reply via email to