Rafiu Fakunle wrote:
Jon Schewe wrote:
I'm running openfiler 2.3 under xen using the images provided. They
seem to be working, thank you Rafiu!
However now I've added a disk to the VM and I can see it and
partition it from the commandline in openfiler:
[EMAIL PROTECTED] openldap]# fdisk -l
Disk /dev/hda: 2760 MB, 2760081408 bytes
16 heads, 63 sectors/track, 5348 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 5348 2694920 83 Linux
Disk /dev/sda: 225.4 GB, 225485783040 bytes
255 heads, 63 sectors/track, 27413 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 27413 220194891 8e Linux LVM
However going to the web gui I don't see any physical volumes available.
What am I doing wrong here?
Could you try exporting the disk to the domU as a virtual block device
pls...
Can you be more specific on what you mean here?
This is how I usually add it:
xm block-attach minnetonka phy:/dev/system/minnetonka_sda /dev/sda
Should I use a different dev node in the VM?
--
Jon Schewe
Research Scientist
BBN Technologies
5775 Wayzata Blvd.
Suite 630
St. Louis Park, MN 55416
952-545-5720 - Office
952-545-5727 - Fax
www.bbn.com
_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users
