Joseph, I don't know what HighPoint card you're talking about, but since 95% of what they sell is 'fakeraid', I'm going to assume that that is what you have. If that's the case, it will not be supported; just install to a software RAID 1 set.
Jason Litka | Xoxide, Inc. Manager, IT & Software Development P: (610) 251-1672 x200 F: (610) 251-0263 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joseph Jenkins Sent: Tuesday, September 30, 2008 9:36 AM To: [email protected] Subject: [OF-users] Question about adding a driver during installation I was able to get a hold of a highpoint sata card. I am trying to figure out a way to load the driver during the installation phase of Openfiler, so that I can have the OS installed onto the RAID. Is there a way I can modify the ISO to include the driver for the card or is it possible to go into expert install and then mount a usb key that has the driver on it? The system that I was able to put together for testing doesn't have a floppy drive. However if the only way I can include this driver during the install is to have a floppy drive then so be it and I will get one. Any ideas? TIA. -- Joseph _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
