Hi Sachin, These branches are for specific devices (config files have to change based on available ports, drivers etc). In your case you have to customize these based on the ALIX board and atheros chipset. Look at one of these (preferrably the tplink branch as it is also atheros) as a guideline, and adjust the configuration to fit your board's specs..
Hope this helps, Y. On Thu, Mar 24, 2011 at 3:31 AM, sachin sharma <[email protected]>wrote: > Hi All, > > I am trying to build openflow extenstion on openwrt stuf via the link > provided below: > > http://www.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT > > > I am able to make my kernel up with openwrt. We work on athros wireless > cards which are plugged on slots within ALIX board. The processor in ALIX > board is X86. > > > So, we boot our wireless cards via netbooting. Finally after a long try, I > am able to make openwrt image for my wireless cards. and the system is > coming up with all openwrt stuff. > > Now I am moving towards my next goal to integrate openflow in openwrt. But > i could not understand the line given in above link. > > git checkout -b openflow-1.0/brcm origin/openflow-1.0/brcm > > What should be this command for image which is compiled at my PC. and this > image would be downloaded to wireless nodes by netbooting . We use > initrd.img and vmlinuz for our wireless nodes. > > Thank you very much for the reply. > > Regards, > Sachin > > _______________________________________________ > openflow-discuss mailing list > [email protected] > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss > >
_______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
