Sorry one more thing, When this error occurs NOX does not seem to alert, register_for_datapath_leave(datapathleave_callback) or datapath_join() .
So if in my controller I send a packet during the time the switch is disconnected NOX will return: no datapath with id 6d00026f13fe480 registered at nox Aaron On Fri, Jul 15, 2011 at 12:21 PM, Aaron Rosen <[email protected]> wrote: > Hi Nick, > > http://codepad.org/0doGkR8G > > Also the machine does have an ipv6 address for the local lan > > arosen@expedient:~$ ip -6 route > fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 > > Though all the switches are on this same LAN so ipv6 here should be > working between the too. > > Is there an easy way to tell flowvisor not to use v6? Or should I > disable it in the OS? > > Thanks, > > Aaron > > > > > On Fri, Jul 15, 2011 at 6:03 AM, Nicholas Bastin <[email protected]> wrote: >> Are you sure it's really not talking on an ipv6 socket? I imagine >> it's very likely that Clemson is doing some 6to4, as are most >> campuses. What does netstat -an say? Also, you might want to try to >> tell flowvisor to bind to v4 sockets only. >> >> -- >> Nick >> > > > > -- > Aaron O. Rosen > Masters Student - Network Communication > 306B Fluor Daniel > -- Aaron O. Rosen Masters Student - Network Communication 306B Fluor Daniel _______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
