Hello everybody. I am realizing some experiments with OpenFlow, but I feel that I am doing something incorrect. I wanted to use my NetFPGA cube as an OpenFlow Switch with 2 ports, and trying to communicate with a pc with this configuration: NetFPGA cube: controller localhost + switch port nf2c3 linked with eth0 of the PC host, and nf2c2 connected with eth1 of the cube; Pc host: eth0 connected with nf2c3.
This way, I run all the commands (controller, ofdatapath, ofprotocol) and I wanted to ping the eth1 with the eth0 of pc host and vice versa. Addresses are: PC -> eth0:192.168.2.10 CUBE-> eht1:192.168.2.5 The problem is that when I try to ping each other, it says destination unreachable. Am I doing something wrong with this configuration? May be the other "terminal" to ping can't stay in the same place of the switch, and so I need to add another host? Thank you. -- Leonardo _______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
