I am success, running "OpenFlow 1.0 for OpenWRT" on Buffalo WHR-G301N.
I made patch for "AR7240 Ethernet Switch driver".
this is add enable_learning attribute for ethernet driver.
My build image has been saved to the following URL.
http://www.srchack.org/pub/JITAKU_RACK/2.5_OpenFlow/openwrt-ar71xx-generic-whr-g301n-squashfs-sysupgrade.bin
http://www.srchack.org/pub/JITAKU_RACK/2.5_OpenFlow/config.tar.gz
does not exist Test Tools?
Way to verify that there is no problem All the features of "OpenFlow 1.0
for OpenWRT.
for "OpenFlow 1.0 for OpenWRT" on WHR-G301N.
Sorry my poor English.
--
------------------------------------------------------
Tochiro
Mail:tochiro.srch...@gmail.com
HP:http://www.srchack.org/
------------------------------------------------------
---
trunk/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c.ORG
2012-02-10 20:33:20.000000000 +0900
+++
trunk/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c
2012-02-25 13:31:02.000000000 +0900
@@ -626,6 +626,11 @@
if (as->vlan) {
vid = as->vlan_id[as->pvid[port]];
mode = AR7240_PORT_VLAN_MODE_SECURE;
+ if (as->vlan_tagged & BIT(port)) {
+ mode = AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK;
+ } else {
+ mode = AR934X_PORT_VLAN2_8021Q_MODE_SECURE;
+ }
} else {
vid = port;
mode = AR7240_PORT_VLAN_MODE_PORT_ONLY;
@@ -780,6 +785,50 @@
}
static int
+ar7240_set_learning_enable(struct switch_dev *dev, const struct switch_attr
*attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ int i;
+ u32 v;
+
+ for (i = 0; i < AR7240_NUM_PORTS; i++) {
+ v = ar7240sw_reg_read(as->mii_bus, AR7240_REG_PORT_CTRL(i));
+ v &= ~AR7240_PORT_CTRL_LEARN;
+
+ if (val->value.i){
+ /* Enable port learning for ALL */
+ v |= AR7240_PORT_CTRL_LEARN;
+ }
+
+ ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(i), v);
+ }
+
+ return 0;
+}
+
+static int
+ar7240_get_learning_enable(struct switch_dev *dev, const struct switch_attr
*attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ u32 v;
+
+ v = ar7240sw_reg_read(as->mii_bus, AR7240_REG_PORT_CTRL(0));
+
+ v &= AR7240_PORT_CTRL_LEARN;
+
+ if (v == AR7240_PORT_CTRL_LEARN){
+ val->value.i = 1;
+ }
+ else {
+ val->value.i = 0;
+ }
+
+ return 0;
+}
+
+static int
ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
struct switch_val *val)
{
@@ -985,6 +1034,13 @@
static struct switch_attr ar7240_globals[] = {
{
.type = SWITCH_TYPE_INT,
+ .name = "enable_learning",
+ .description = "Enable learning",
+ .set = ar7240_set_learning_enable,
+ .get = ar7240_get_learning_enable,
+ .max = 1
+ }, {
+ .type = SWITCH_TYPE_INT,
.name = "enable_vlan",
.description = "Enable VLAN mode",
.set = ar7240_set_vlan,
_______________________________________________
openflow-discuss mailing list
openflow-discuss@lists.stanford.edu
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
