Hi,all: Thanks very much for your advice about installing Pronto.
Now I come to the final steps but get some problems. I log in to switch configuration panel via broswer. But I have no ideas about how to set OpenFlow Controller IP address and Datapath ID of the switch. I use OpenFlow tutorial(includes Openflow, NOX, Mininet, Flowvisor,etc) loaded by Virtual Box. Is the controller IP address 192.168.56.102(eth3,host-only network) which is also used as SSH access into OpenFlow? Now I set following parameters: ip address for the switch: 192.168.1.1 Netmask for the IP:255.255.255.0 Gateway IP address for the switch:192.168.56.1 System Name:pronto OpenFlow Controller IP address:192.168.56.102 OpenFlow Controller TCP port:6633 Fail open/close: open Datapath ID of this switch: ? Log level:? What Datapath ID should I set? What Log level means? and what Fail open/close means? Thanks very much. Weiyang Mo _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
