Thanks very much. Is there a manual(e.g command list) for the switch? Because in the past I just used the real OpenFlow switches and they are very easy to check logs and info.
Best Weiyang ________________________________________ From: Tatsuya Yabe [ty...@stanford.edu] Sent: Monday, April 16, 2012 3:38 PM To: Weiyang Mo Cc: openflow-discuss@lists.stanford.edu Subject: Re: [openflow-discuss] Setup OpenFlow switch on NetFPGA Hi Weiyang, Have you already successfully installed NetFPGA base package? (It is a prerequisite...) You can ask followup questions on NetFPGA forums. For installation: http://netfpga.org/forums/forumdisplay.php?3-Installation-and-Setup For OpenFlow design specific: http://netfpga.org/forums/forumdisplay.php?13-OpenFlow-on-NetFPGA Thank you, Tatsuya On Apr 16, 2012, at 2:30 PM, Weiyang Mo wrote: > Hi,all, > > What I am doing is trying to install a virtual openflow switch on NetFPGA > board, referring to the following page: > http://yuba.stanford.edu/foswiki/bin/view/OpenFlow/Deployment/HOWTO/LabSetup > > I already completed step0-step2. > > However when I come to the Step 3, I don't know under which directory should > I run the command: > # /root/NF2/lib/scripts/cpci_reprogram/cpci_reprogram.pl > # nf_download ./datapath/hwtable_nf2/openflow_switch.bit > > I tried them in the openflow directory and root, but it shows no such file or > directory. > > Any ideas? > > Thanks > > Weiyang > _______________________________________________ > openflow-discuss mailing list > openflow-discuss@lists.stanford.edu > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
