Reposting to list from proper email addr. Also, I assume you're run 'sudo make install' from oftest/tools/munger Forwarded message: > From: Dan Talayco at gmail <dan.tala...@gmail.com> > To: Xuan-Nam Nguyen <xuan-nam.ngu...@inria.fr> > Cc: kalapriya k <kalapr...@gmail.com>, Damien Saucez > <damien.sau...@inria.fr>, openflow-discuss@lists.stanford.edu > Date: Thursday, May 3, 2012 8:57:25 AM > Subject: Re: [openflow-discuss] Pronto 3290 max flow entries ? > > Oops, wait. I misread the subject. > > If you are trying to connect to a 3290, you can't specify --host=127.0.0.1 > (that would be trying to connect to a vswitch running on the local host). > > Assuming you're talking to the 3290 over an interface with the IP address > 192.168.1.1(for example) you would use that: > > sudo ./oft --host=192.168.1.1 --port=6634 --verbose --test-spec=Echo > --platform=remote > > The remote platform doesn't really matter if you're not using data plane > tests. Again, this assumes your 3290 is trying to talk to a controller at > 192.168.1.1 at port 6634. Note that no other controller should be running on > the same host. > > -Dan
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
