I made sure I killed the applications running on the port 6633 . It would still give me this error after running certain 2 -3 tests . Also, do I need to make changes to the remote.py?
On Mon, Jun 25, 2012 at 2:05 PM, Zoltán Lajos Kis < zoltan.lajos....@ericsson.com> wrote: > Hi, > > Address already used suggests that you have some application running, > which already listens on port 6633 (e.g. NOX). > You could also try using --platform=local instead of setting remote plus > the host and port. > > Regards, > Zoltan. > > ________________________________________ > From: openflow-discuss-boun...@lists.stanford.edu [ > openflow-discuss-boun...@lists.stanford.edu] On Behalf Of shreya pandita [ > shreya.pand...@gmail.com] > Sent: Monday, June 25, 2012 8:00 PM > To: openflow-discuss@lists.stanford.edu > Subject: [openflow-discuss] Reference switch issues. > > Hie All, > > I am running the oftest against the reference switch. I face some troubles > . If I run the tests at once, I see address already in use error . If I run > them separately , they are fine . But so many basic tests are failing , > which I think is not good. > > Do I need to make any changes to the port-mapping in the remote.py ??? > > [root@dev2 tests]# ./run_switch.py > Creating veth pair 0 > Creating veth pair 1 > Creating veth pair 2 > Creating veth pair 3 > Cmd: ['/sbin/ifconfig', 'veth0', '192.168.10.1', 'netmask', > '255.255.255.0'] > Cmd: ['/sbin/ifconfig', 'veth1', '192.168.11.1', 'netmask', > '255.255.255.0'] > Cmd: ['/sbin/ifconfig', 'veth2', '192.168.12.1', 'netmask', > '255.255.255.0'] > Cmd: ['/sbin/ifconfig', 'veth3', '192.168.13.1', 'netmask', > '255.255.255.0'] > Cmd: ['/sbin/ifconfig', 'veth4', '192.168.14.1', 'netmask', > '255.255.255.0'] > Cmd: ['/sbin/ifconfig', 'veth5', '192.168.15.1', 'netmask', > '255.255.255.0'] > Cmd: ['/sbin/ifconfig', 'veth6', '192.168.16.1', 'netmask', > '255.255.255.0'] > Cmd: ['/sbin/ifconfig', 'veth7', '192.168.17.1', 'netmask', > '255.255.255.0'] > ../../openflow/udatapath/ofdatapath > ../../openflow/secchan/ofprotocol > Starting ofprotocol in 2 seconds; ^C to quit > Started ofdatapath on IFs veth0,veth2,veth4,veth6 with pid 11599 > Jun 25 17:09:32|00001|secchan|INFO|OpenFlow reference implementation > version 1.0.0 > Jun 25 17:09:32|00002|secchan|INFO|OpenFlow protocol version 0x01 > Jun 25 17:09:32|00003|secchan|WARN|new management connection will receive > asynchronous messages > Jun 25 17:09:32|00004|rconn|INFO|unix:/tmp/ofd: connecting... > Jun 25 17:09:32|00005|rconn|INFO|tcp:127.0.0.1:6633<http://127.0.0.1:6633>: > connecting... > Jun 25 17:09:32|00001|datapath|ERR|veth0 device has assigned IP address > 192.168.10.1 > Jun 25 17:09:32|00002|datapath|ERR|veth0 device has assigned IPv6 address > fe80::e087:1eff:feef:f050 > Jun 25 17:09:32|00003|datapath|ERR|veth2 device has assigned IP address > 192.168.12.1 > Jun 25 17:09:32|00004|datapath|ERR|veth2 device has assigned IPv6 address > fe80::30f5:5dff:fe36:6814 > Jun 25 17:09:32|00005|datapath|ERR|veth4 device has assigned IP address > 192.168.14.1 > Jun 25 17:09:32|00006|datapath|ERR|veth4 device has assigned IPv6 address > fe80::70fc:25ff:fef4:f11f > Jun 25 17:09:32|00007|datapath|ERR|veth6 device has assigned IP address > 192.168.16.1 > Jun 25 17:09:32|00008|datapath|ERR|veth6 device has assigned IPv6 address > fe80::c4d1:5bff:fef3:ed8e > Jun 25 17:09:32|00006|rconn|INFO|unix:/tmp/ofd: connected > Jun 25 17:09:32|00007|port_watcher|INFO|Datapath id is 00232086c636 > Jun 25 17:09:32|00008|port_watcher|INFO|Identified data path local port as > "tap2". > Jun 25 17:09:33|00009|rconn|INFO|tcp:127.0.0.1:6633<http://127.0.0.1:6633>: > connection timed out > Jun 25 17:09:33|00010|rconn|INFO|tcp:127.0.0.1:6633<http://127.0.0.1:6633>: > connection dropped > Jun 25 17:09:33|00011|rconn|INFO|tcp:127.0.0.1:6633<http://127.0.0.1:6633>: > waiting 1 seconds before reconnect > > > [root@dev2 tests]# ./oft --platform=remote --host=127.0.0.1 --port=6633 > --verbose --test-spec=basic > WARNING: No route found for IPv6 destination :: (no default route?) > runTest (basic.DataPlaneOnly) ... ok > runTest (basic.DescStatsGet) ... Controller startup failed (no switch > addr); exiting > ERROR > runTest (basic.Echo) ... Exception in thread Thread-6: > Traceback (most recent call last): > File "/usr/lib64/python2.6/threading.py", line 532, in __bootstrap_inner > self.run() > File "build/bdist.linux-x86_64/egg/oftest/controller.py", line 389, in run > self.listen_socket.bind((self.host, self.port)) > File "<string>", line 1, in bind > error: [Errno 98] Address already in use > > > > > -- > warm regards, > > Shreya Pandita > > >
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
