Hi Yiannis, Somehow i forgot about this , can you explain better when you mentioned this please ?
It is to be sent when you explicitly configure the port status "down" (using the port-mod openflow message). Thanks Etienne On 16 May 2013 08:51, Etienne Mula <etiennem...@gmail.com> wrote: > Thanks Guys, at least i know that the AP is working fine like this. Would > have loved this functionality to work but in anycase will find a workaround > :) > > Thanks Again > Etienne > > > On 16 May 2013 04:53, Ben Pfaff <b...@nicira.com> wrote: > >> On Thu, May 16, 2013 at 12:38:37PM +1000, Andrew Ferguson wrote: >> > I think it's a place of ambiguity in the spec, perhaps. for example, >> > with the indigo switch firmware (OF 1.0), if there's a cable >> > plugged-in, and I pull it out, then I see OFPPS_LINK_DOWN in the >> > modified port description. if there's a cable plugged-in, and from >> > the switch OS, I do an 'ifconfig down', then I see both >> > OFPPS_LINK_DOWN and OFPPC_PORT_DOWN in the ofp_port_status message. >> >> Linux doesn't allow querying link status when a port is administratively >> down, so Linux-based implementations, at least, are not going to have a >> useful OFPPS_LINK_DOWN status if OFPPC_PORT_DOWN is set. >> _______________________________________________ >> openflow-discuss mailing list >> openflow-discuss@lists.stanford.edu >> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >> > > > > -- > Thanks and Regards > Etienne Mula > -- Thanks and Regards Etienne Mula
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
