Hi Tim, Can you try with a single switch first, pinging two hosts attached in two ports? Do you see the stats being updated? If not, do you see packet-ins in your controller?
Regards, Y. On Wed, Jun 26, 2013 at 3:51 AM, Tim Bauge <timba...@hotmail.co.uk> wrote: > Hi all, > I've got a couple of Linksys WRT54GL Openflow enabled switches (Pantou on > OpenWRT). The controller is Floodlight with learning switch and forwarding > enabled When I push down simple static flows to the switches, I find that > the switches do not enforce them. So with the topology > subnet1-S1-S2-subnet2, S1 has a rule dest=subnet2;action=send_to_s2 and S2 > a rule dest-subnet1;action=send_to_s1, then I can't ping between hosts on > subnet1 and subnet2. I can see the flow descriptions on the switches using > the dpctrl dump-flows command, so I know the switches have got the rules. > But the statistics on the switches show there are no matches for the flows > despite the pings. > My main question is a sanity check: am I right in thinking this should > work ? do these symptoms point to something obvious ? > Many thanks, > Tim > > _______________________________________________ > openflow-discuss mailing list > openflow-discuss@lists.stanford.edu > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss > >
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
