Thank you Alison I will wait for your reply.

On Fri, Dec 13, 2013 at 10:56 AM, Alison Chan <[email protected]>wrote:

> The config looks wrong to me (I don't have access to our OpenWrt OF
> switches now to confirm though), and you shouldn't be able to ping the
> controller from the data plane interface with it set for out of band
> control. I will look at a working setup in the lab tomorrow morning and
> share my config files.
>
> Cheers,
>
> Alison Chan, Kettering University
> +1 909 278 7753
> (sent from my phone)
> On 12 Dec 2013 13:22, "Sayed Qaiser Ali Shah" <[email protected]>
> wrote:
>
>> Thank you Shayan. Are the configurations right?
>>
>>
>> On Thu, Dec 12, 2013 at 11:21 PM, Shayan Saeed 
>> <[email protected]>wrote:
>>
>>> Run the controller with - - debug option if you want to see messages
>>> too.
>>> On Dec 12, 2013 12:15 PM, "Sayed Qaiser Ali Shah" <
>>> [email protected]> wrote:
>>>
>>>> Hello everybody I have installed OpenWRT on my TP-Link 1043
>>>> successfully then I configured it as follow.
>>>> --------------------------------------------------------
>>>> Configuration of /etc/config/openflow
>>>> config 'ofswitch'
>>>>         option 'dp' 'dp0'
>>>>         option 'dpid' '000000000001'
>>>>         option 'ofports' 'wlan0 eth0.1 eht0.2 eth0.3 eth0.4'
>>>>         option 'ofctl' 'tcp:192.168.2.12:6633'
>>>>         option 'mode' 'outofband'
>>>> --------------------------------------------------------
>>>> Configuration of /etc/config/network
>>>> config 'interface' 'loopback'
>>>>         option 'ifname' 'lo'
>>>>         option 'proto' 'static'
>>>>         option 'ipaddr' '127.0.0.1'
>>>>         option 'netmask' '255.0.0.0'
>>>>
>>>> config 'interface' 'lan'
>>>>         option 'ifname' 'eth0.1'
>>>>         option 'type' 'bridge'
>>>>         option 'proto' 'static'
>>>>         option 'ipaddr' '192.168.0.2'
>>>>         option 'netmask' '255.255.255.0'
>>>>
>>>> config 'interface' 'wan'
>>>>         option 'ifname' 'eth0.2'
>>>>         option 'proto' 'static'
>>>>         option 'ipaddr' '192.168.2.2'
>>>>         option 'netmask' '255.255.255.0'
>>>>
>>>> config 'switch'
>>>>         option 'name' 'rtl8366rb'
>>>>         option 'reset' '1'
>>>>         option 'enable_vlan' '1'
>>>>
>>>> config 'switch_vlan'
>>>>         option 'device' 'rtl8366rb'
>>>>         option 'vlan' '1'
>>>>         option 'ports' '1 2 3 4 5t'
>>>>
>>>> config 'switch_vlan'
>>>>         option 'device' 'rtl8366rb'
>>>>         option 'vlan' '2'
>>>>         option 'ports' '0 5t'
>>>> --------------------------------------------------
>>>>  Configuration of /etc/config/wireless
>>>> config wifi-device  radio0
>>>>         option type     mac80211
>>>>         option channel  11
>>>>         option macaddr  90:f6:52:a4:b8:5c
>>>>         option hwmode   11ng
>>>>         option htmode   HT20
>>>>         list ht_capab   SHORT-GI-40
>>>>         list ht_capab   DSSS_CCK-40
>>>>         option disabled 0
>>>>
>>>> config wifi-iface
>>>>         option device   radio0
>>>>         option network  lan
>>>>         option mode     ap
>>>>         option ssid     OpenWrt
>>>>         option encryption none
>>>> ------------------------------------------------------------
>>>>
>>>> I connected my laptop having POX controller to wan port. I set my
>>>> laptop IP to 192.168.2.12. The IP which I have used in 
>>>> /etc/config/openflow.
>>>> I run pox controller with the command
>>>>  sudo ./pox.py openflow.of_01 --address=192.168.2.12 --port=6633
>>>> forwarding.l2_learning.
>>>> Then I connected another laptop OpenWRT SSID (via WiFi) and use ping
>>>> command to ping 192.168.2.12. Ping was successful but controller didn't
>>>> display anything. I am not sure what I am doing wrong. Can anybody help me
>>>> in this please.
>>>>
>>>> _______________________________________________
>>>> openflow-discuss mailing list
>>>> [email protected]
>>>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
>>>>
>>>>
>>
>>
>> --
>>
>>
>>
>>
>> *Regards Sayed Qaiser Ali ShahMSIT-12 NUST (SEECS)*
>>
>> _______________________________________________
>> openflow-discuss mailing list
>> [email protected]
>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
>>
>>


-- 




*RegardsSayed Qaiser Ali ShahMSIT-12NUST (SEECS)*
_______________________________________________
openflow-discuss mailing list
[email protected]
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss

Reply via email to