I just came to know about inband and outofband mechanisms. I am using outofband mechanism. I think that problem is because of outofband mechanism. Am I right about it? How can I use inband mechanism of TP Link 1043?
On Fri, Dec 27, 2013 at 1:24 AM, Sayed Qaiser Ali Shah < [email protected]> wrote: > Hello everybody, > > I am using OpenWrt on TP-Link 1043 and I have configured that using > openflow. I am using POX controller on my Laptop. the topology is given > below > > > PC-1 ---------------*|AP|* ----------------- PC-2 > | > | > | > Controller > > Controller is connected to AP via wired link on WAN port controller has IP > address 192.168.1.142 and WAN port of AP has IP address 192.168.1.203. I > have configured IP addresses of PC-1 and PC-2 from different network as WAN > port connects different networks. IP's of > PC-1 is 192.168.2.2 > PC-2 is 192.168.2.3 > During connection of hosts to AP POX controller gets packets and when > connections are successful. I am getting ping responses from one host and > on the other host ping response I am getting "Destination host unreachable" > While controller is getting packets. I don't know what is the problem. > Another problem is that when my controller is off and I connect hosts to > AP or switch of controller when hosts are connected and wait for time outs. > I am still getting ping response from the same host. I don't know what is > the problem. > Can anybody help me in this Regards. Thanks in advance. :) > -- *RegardsSayed Qaiser Ali ShahMSIT-12NUST (SEECS)*
_______________________________________________ openflow-discuss mailing list [email protected] https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
