Yes Murphy I am using l2_learning and POX controller log shows switch is
connected but is not taking any action. I am also confused and don't know
what is the problem.
May be there is problem with configuration of switch. Because when
controller is down it still pings devices connected to switch. Don't know
what to do with.


On Mon, Dec 30, 2013 at 3:47 AM, Murphy McCauley
<murphy.mccau...@gmail.com>wrote:

> I'm confused.  You say the controller isn't taking action, but also that
> you're running l2_learning (which takes action).
>
> If you run...
> ./pox.py samples.pretty_log --DEBUG openflow.of_01 --address=192.168.1.2
> --port=6633
> .. the POX log should say that the switches have connected and pings
> shouldn't go through.  Yes?  No?
>
> -- Murphy
>
> On Dec 29, 2013, at 1:55 PM, Sayed Qaiser Ali Shah <
> 11msitqs...@seecs.edu.pk> wrote:
>
> Hello everybody,
>
> I am using POX controller on my Laptop. I have installed OpenWRT on TP
> Link 1043 nd. IP's of devices are as follows.
> WAN port of Tp Link to which Laptop (controller is attached) : 192.168.1.1
> IP of Laptop: 192.168.1.2
>
> To assign different network to wireless devices
> I have assigned IP to wlan0 via ifconfig. i.e. ifconfig wlan0 192.168.2.1
> IP of PC1: 192.168.2.2
> IP of PC2: 192.168.2.3
>
> I connected PC1 and PC2 to devices successfully. Controller was unplugged
> and when I pinged PC2 from PC1 it was successful. But what I want is
> devices don't ping when controller has not defined a rule for that flow and
> flow is saved in AP.
> Note: I am getting packets (Logs) on controller but controller is not
> taking any decision. I am running l2_learning just for checking by using
> command
> ./pox.py openflow.of_01 --address=192.168.1.2 --port=6633
> forwarding.l2_learning samples.pretty_log.
> Please anybody help me out of this. I am stuck in this since last month.
>
>
> --
>
>
>
>
> *Regards Sayed Qaiser Ali ShahMSI NUST (SEECS)*
>  _______________________________________________
> openflow-discuss mailing list
> openflow-discuss@lists.stanford.edu
> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
>
>
>


-- 




*RegardsSayed Qaiser Ali ShahMSIT-12NUST (SEECS)*
_______________________________________________
openflow-discuss mailing list
openflow-discuss@lists.stanford.edu
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss

Reply via email to