Hi Yiannis, thanks for your interest and response. I have build this image http://archive.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT#Supported_Devicesthat I understand is useful for either G, GL and GS from http://wiki.openwrt.org/toh/linksys/wrt54g
The tftp option is a good chance, but after I have build the image, I can not reset my device or identify on the wired-network devices from my laptop connected. So if I can not recognise the device, I can not try any other option like the tftp.... :( 2014-02-20 2:03 GMT+01:00 Yiannis Yiakoumis <gyiakou...@gmail.com>: > Did you build from source or you used the precompiled image? > The image is for WRT54GL, not GS. I don't know what's supposed to happen > in this case. > > Check the ports on reboot and see if they try to send anything out. > Also try the tftp method to install the vanilla images for WRT54GS. > > Y. > > > On Wed, Feb 19, 2014 at 2:41 PM, Adrián Villalba > <adriavilla...@gmail.com>wrote: > >> Hi! >> >> After flashing the image of Pantou (directly upgrading the firmware) in a >> Linksys WRT45GS I have no feedback with my router. I can not acces to the >> default gateway. >> >> I have tried to reset my device, and It does not response. >> >> I have tried in two different Linksys. Nothing. >> >> It seems so strange. Has anybody a solution for this issue? >> >> Thanks. >> >> -- >> Adrián >> >> _______________________________________________ >> openflow-discuss mailing list >> openflow-discuss@lists.stanford.edu >> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >> >> > > > -- > Yiannis . > -- Atentamente, Adrián
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
