Adding the openflow plugin team... Best,
Phil On Tuesday, March 22, 2016, sdavis <[email protected]> wrote: > So when I reload my OF enabled router, ODL (Beryllium) automatically > installs 2 or 3 Unidentified Flows (UF$TABLE...). Where would I find these > default flows on ODL so I can either modify them or delete them? > > Here's an example from right after a reload: > > Flow ID: 1 Priority: 100 Status: Active Rule: > In Port: generic Ether type: 0x000088cc Idle Timeout : 0 secs Hard Timeout > : 0 secs > > Instructions: Apply-Actions > Action: FORWARD > Out Port: send to controllerStatistics: > Total Pkts: 0 > Total Bytes: 0 > Timing Info: > Time Elapsed(Since Flow Added) : 6 secs > Time Elapsed(Since Last Packet Hit) : 6 secs > > Flow ID: 2 Priority: 0 Status: Active Rule: In Port: generic Idle Timeout > : 0 secs Hard Timeout : 0 secs > > Instructions: Apply-Actions > Action: DROPStatistics: > Total Pkts: 0 > Total Bytes: 0 > Timing Info: > Time Elapsed(Since Flow Added) : 6 secs > Time Elapsed(Since Last Packet Hit) : 6 secs > > How do I change this behavior? How ensure these default flows don’t get > installed upon router reload and how would I tell ODL to install a > different set of defined flows upon router reload? > > Thanks! > -- Phil Robb Sr. Director Of Technical Operations OpenDaylight Project (O) 970-229-5949 (M) 970-420-4292 Skype: Phil.Robb
_______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
