Yes, that's correct. On Sun, May 8, 2016 at 1:33 AM, Danijel Teslic <[email protected]> wrote:
> Thank you everybody for your help. As I can see from the link Anil > provided port masking should be supported in Lithium-SR4 version, so I > should just install that version and it should be OK? > > On 7 May 2016 at 00:20, Jamo Luhrsen <[email protected]> wrote: > >> >> >> On 05/06/2016 03:09 PM, Anil Vishnoi wrote: >> > Hi Daniel, >> > >> > OpenFlow protocol (spec 1.3) don't have support for L4 port range/mask, >> so that's the reason ODL openflowplugin yang model don't have support for >> that. >> > >> > When you directly installing it on the OVS through CLI, it's working >> because it's using Nicira extension port mask feature to enable the support >> for >> > port range matching. ODL openflowplugin do support the port range >> nicira extension, so you can use that to install you flows. Please >> following this >> > gerrit patch for more details. >> > >> > https://git.opendaylight.org/gerrit/#/c/32170/ >> > >> > You can look at the yang file to build your restconf body to use port >> range. >> >> this is a big leap, imho, for people to figure out. any chance we have >> any >> restconf body examples using the nicira extension? >> >> I found this template [0] which might help to figure it out, but hoping >> there >> are other examples. >> >> JamO >> >> [0] >> https://github.com/opendaylight/integration-test/blob/master/tools/odl-mdsal-clustering-tests/clustering-performance-test/nicira-ext-all.json >> >> >> > Thanks >> > Anil >> > >> > On Fri, May 6, 2016 at 2:11 PM, Luis Gomez <[email protected] <mailto: >> [email protected]>> wrote: >> > >> > Hi Daniel, as you pointed out in the yang model, I do not think >> this is supported in ODL today. >> > >> >> On May 6, 2016, at 12:19 AM, Danijel Teslic <[email protected] >> <mailto:[email protected]>> wrote: >> >> >> >> Hello, >> >> >> >> I'm trying to add a flow on my OVS with tcp port range (e.g. >> 1000-1007) via OpenDaylight Lithium controller. I have successfuly >> installed this >> >> flow directly through CLI on my OVS (command: sudo ovs-ofctl >> add-flow bridge1 >> dl/type=0x800,nw/proto=6,tp_dst=1000/65528,actions=output:1) so I >> >> know my OVS version supports this. >> >> >> >> What I want to do now is send REST command to my controller, and >> then the controller sends appropriate OpenFlow command to OVS which will add >> >> specified flow. To do this, I need appropirate XML body to send in >> my REST command. I've tried with the .xml body presented below, but I'm >> >> getting an error. >> >> >> >> |<?xml >> >> >> >> version="1.0"encoding="UTF-8"standalone="no"?><flowxmlns="urn:opendaylight:flow:inventory"><instructions><instruction><order>0</order><apply-actions><action><order>0</order><output-action><output-node-connector>1</output-node-connector><max-length>60</max-length></output-action></action></apply-actions></instruction></instructions><table_id>0</table_id><id>252</id><match><ethernet-match><ethernet-type><type>2048</type></ethernet-type></ethernet-match><ip-match><ip-protocol>6</ip-protocol></ip-match><tcp-source-port>1000/65528</tcp-source-port></match><hard-timeout>0</hard-timeout><cookie>10</cookie><idle-timeout>0</idle-timeout><flow-name>flow-instruction-go-to-tablee</flow-name><priority>400</priority></flow>| >> >> >> >> I think that I'm not using correct .xml tag for tcp port since I >> get an error below. >> >> >> >> >> >> |<errorsxmlns="urn:ietf:params:xml:ns:yang:ietf-restconf"><error><error-type>protocol</error-type><error-tag>malformed-message</error-tag><error-message>Error >> >> parsing input: Incorrect lexical representation of integer value: >> 1000/65528. An integer value can be defined as: - a decimal number, - a >> >> hexadecimal number (prefix 0x), - an octal number (prefix 0). >> Signed values are allowed. Spaces between digits are NOT >> >> allowed.</error-message></error></errors>| >> >> It seems that the YANG model does not support tcp port masking >> according to this >> >> link >> https://github.com/opendaylight/openflowplugin/blob/master/model/model-flow-base/src/main/yang/opendaylight-match-types.yang#L203-L212 >> >> >> >> Could you please clarify if this is really the case and if not, >> provide correct syntax for adding tcp port with a mask? >> >> _______________________________________________ >> >> openflowplugin-dev mailing list >> >> [email protected] <mailto: >> [email protected]> >> >> https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev >> > >> > >> > _______________________________________________ >> > openflowplugin-dev mailing list >> > [email protected] <mailto: >> [email protected]> >> > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev >> > >> > >> > >> > >> > -- >> > Thanks >> > Anil >> > >> > >> > _______________________________________________ >> > openflowplugin-dev mailing list >> > [email protected] >> > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev >> > >> > > -- Thanks Anil
_______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
