The test stop/start mininet for every testing different VTN features. The topology depends on the feature being tested.
Regards, Venkat G -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Shuva Jyoti Kar Sent: Tuesday, September 6, 2016 9:32 AM To: Jamo Luhrsen <[email protected]>; [email protected] Subject: Re: [openflowplugin-dev] flow add failed ERROR message The switch was absent when the flow was about to be provisioned using the add-flow rpc. Does the test involve disconnecting the switch and reconnecting? Thanks, Shuva -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jamo Luhrsen Sent: Tuesday, September 06, 2016 9:57 PM To: [email protected] Subject: [openflowplugin-dev] flow add failed ERROR message Hi OFP, Does anyone know when/why we would see the below ERROR message in the log? I think I've seen it in netvirt CSIT logs, but the below message can be seen in an l2switch CSIT log [0]. This is with Boron RC3. is it something to worry about? 2016-09-06 13:53:33,525 | ERROR | entLoopGroup-5-3 | SalFlowServiceImpl | 200 - org.opendaylight.openflowplugin.impl - 0.3.0.Boron | flow add failed for flow=AddFlowInput [_bufferId=4294967295, _cookie=FlowCookie [_value=3026418949592973312], _flags=FlowModFlags [_cHECKOVERLAP=false, _rESETCOUNTS=false, _nOPKTCOUNTS=false, _nOBYTCOUNTS=false, _sENDFLOWREM=false], _flowName=mac2mac, _flowRef=FlowRef [_value=KeyedInstanceIdentifier{targetType=interface org.opendaylight.yang.gen.v1.urn.opendaylight.flow.inventory.rev130819.tables.table.Flow, path=[org.opendaylight.yang.gen.v1.urn.opendaylight.inventory.rev130819.Nodes, org.opendaylight.yang.gen.v1.urn.opendaylight.inventory.rev130819.nodes.Node[key=NodeKey [_id=Uri [_value=openflow:2]]], org.opendaylight.yang.gen.v1.urn.opendaylight.flow.inventory.rev130819.FlowCapableNode, org.opendaylight.yang.gen.v1.urn.opendaylight.flow.inventory.rev130819.tables.Table[key=TableKey [_id=0]], org.opendaylight.yang.gen.v1.urn.opendaylight.flow.inventory.rev130819.tables.table.Flow[key=FlowKey [_id=Uri [_value=0]]]]}], _flowTable=FlowTableRef [_value=KeyedInstanceIdentifier{targetType=interface org.opendaylight.yang.gen.v1.urn.opendaylight.flow.inventory.rev130819.tables.Table, path=[org.opendaylight.yang.gen.v1.urn.opendaylight.inventory.rev130819.Nodes, org.opendaylight.yang.gen.v1.urn.opendaylight.inventory.rev130819.nodes.Node[key=NodeKey [_id=Uri [_value=openflow:2]]], org.opendaylight.yang.gen.v1.urn.opendaylight.flow.inventory.rev130819.FlowCapableNode, org.opendaylight.yang.gen.v1.urn.opendaylight.flow.inventory.rev130819.tables.Table[key=TableKey [_id=0]]]}], _hardTimeout=300, _idleTimeout=600, _instructions=Instructions [_instruction=[Instruction [_instruction=ApplyActionsCase [_applyActions=ApplyActions [_action=[Action [_action=OutputActionCase [_outputAction=OutputAction [_maxLength=65535, _outputNodeConnector=Uri [_value=openflow:2:2], augmentation=[]], augmentation=[]], _key=ActionKey [_order=0], _order=0, augmentation=[]]], augmentation=[]], augmentation=[]], _key=InstructionKey [_order=0], _order=0, augmentation=[]]], augmentation=[]], _match=Match [_ethernetMatch=EthernetMatch [_ethernetDestination=EthernetDestination [_address=MacAddress [_value=8e:95:d9:07:c8:69], augmentation=[]], _ethernetSource=EthernetSource [_address=MacAddress [_value=9a:ef:c0:33:48:b6], augmentation=[]], augmentation=[]], augmentation=[]], _node=NodeRef [_value=KeyedInstanceIdentifier{targetType=interface org.opendaylight.yang.gen.v1.urn.opendaylight.inventory.rev130819.nodes.Node, path=[org.opendaylight.yang.gen.v1.urn.opendaylight.inventory.rev130819.Nodes, org.opendaylight.yang.gen.v1.urn.opendaylight.inventory.rev130819.nodes.Node[key=NodeKey [_id=Uri [_value=openflow:2]]]]}], _priority=10, _tableId=0, _transactionUri=Uri [_value=1036985268], augmentation=[]], errors=Device disconnected Thanks, JamO [0] https://logs.opendaylight.org/releng/jenkins092/l2switch-csit-1node-switch-only-boron/701/archives/karaf.log.gz _______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev _______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ---------------------------------------------------------------------------------------------------------------------------------------------------- _______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
