Hello, I'm Jake Kim and I am beginner in SDN.
Since I wanted to use OF-DPA in ODL, I asked how to connect the switch in
controller last month.
After I installed the '*odl-openflowplugin-flow-services-rest’ *in
controller, I could make connection with switches.
However, the connection was terminated immediately.
The OpenFlow I used is 1.3 version, and the ODL I used is Oxygen-SR1
(karaf-0.8.1).
The log in the switch is as follows.
01-02 03:15:36.298519 [ofconnectionmanager] cxn 163.152.20.50:6653:
DISCONNECTED->CONNECTING
01-02 03:15:36.299089 [ofconnectionmanager] cxn 163.152.20.50:6653:
CONNECTING->HANDSHAKE_COMPLETE
01-02 03:15:36.303713 [ofstatemanager] Unhandled message
of_meter_features_stats_request
from cxn 0.
01-02 03:15:36.303801 [ofstatemanager] Unhandled message
of_group_features_stats_request from cxn 0.
01-02 03:15:36.322237 [ofconnectionmanager] Upgrading cxn 163.152.20.50:6653
to master
01-02 03:15:36.435181 [ofconnectionmanager] cxn 163.152.20.50:6653:
Connection closed by remote host
01-02 03:15:36.435243 [ofconnectionmanager] cxn 163.152.20.50:6653:
HANDSHAKE_COMPLETE->CLOSING
01-02 03:15:36.435316 [ofconnectionmanager] cxn 163.152.20.50:6653:
CLOSING->DISCONNECTED
You can see that there are some wrong with meter and group request packets.
The switches continue to repeat the above steps.
So, I turned on the wireshark in the controller.
This is a part of OFPT_FEATURES_REPLY packet which the switch send to the
controller after they give and take the HELLO packets.
.... .... .... .... .... .... .... ...1 = OFPC_FLOW_STATS: True
.... .... .... .... .... .... .... ..1. = OFPC_TABLE_STATS: True
.... .... .... .... .... .... .... .1.. = OFPC_PORT_STATS: True
.... .... .... .... .... .... .... 0... = OFPC_GROUP_STATS: False
.... .... .... .... .... .... ..0. .... = OFPC_IP_REASM: False
.... .... .... .... .... .... .1.. .... = OFPC_QUEUE_STATS: True
.... .... .... .... .... ...0 .... .... = OFPC_PORT_BLOCKED: False
There is no information about meter feature, but the switch has stated that
it cannot handle the Group stats request!
Nevertheless, the controller kept asking the switch to Group feature stats.
How can I fix this problem?
Could I turn off some option to prevent the controller from checking the
Group and Meter features in advance?
_______________________________________________
openflowplugin-dev mailing list
[email protected]
https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
