It usually means there was a timeout reading TPKT header. TPKT is a wrapper
around a H.245 message. It consists of 4 bytes: a constant value 3, a padding
byte (usually 0),
and 2 bytes showing packet length. Maybe your equipment does not set the first
byte to 3?
A tcpdump/wireshark could reveal more details.
----- Original Message -----
From: Paul Hii
To: [email protected]
Cc: Megat Ahmad Nazri
Sent: Thursday, September 04, 2008 10:07 AM
Subject: Re: [Openh323gk-users] Openh323gk-users Digest, Vol 22, Issue 16
Hi,
we have been having an issue with a Tandberg Edge 95 MXP that is failing to
establish calls via our gnugk 2.2.7.
Tandberg Edge 95 MXP (Malaysia) --- gnugk227 (Australia) --- Tandberg 150
(Australia)
The gnugk227 is in routed mode and proxies all calls. Both the Edge 95 and
T150 are registered to the gnugk227.
The T150 initiated the call via the gnugk227 to Edge 95. The usual arq, acf,
q931 (setup, alert, connect) happens until the call connection failed in the
exchange of h245 terminalCapabilitySet.
Please see the gnugk log below:
2008/08/28 14:27:31.333 3 ProxyChannel.cxx(3719) H245
Connected from T150:5559 on gnugk227:11473
2008/08/28 14:27:31.436 3 ProxyChannel.cxx(3751) H245
Connect to edge95:11016 from gnugk227:0 successful
2008/08/28 14:27:31.436 5 ProxyChannel.cxx(5088)
ProxyH(5) total sockets 4
2008/08/28 14:27:31.437 5 job.cxx(426) JOB
Job H245Connector deleted
2008/08/28 14:27:31.437 5 job.cxx(415) JOB
Worker threads: 21 total - 19 busy, 2 idle
2008/08/28 14:27:31.511 5 yasocket.cxx(783)
ProxyH(5) 1 sockets selected from 4, total 4/0
2008/08/28 14:27:31.511 5 ProxyChannel.cxx(623) H245s
Reading from T150:5559
2008/08/28 14:27:31.512 4 ProxyChannel.cxx(1093) H245
Received: request terminalCapabilitySet {
.................
2008/08/28 14:27:31.513 4 ProxyChannel.cxx(4487) H245
Request: terminalCapabilitySet
2008/08/28 14:27:31.581 5 yasocket.cxx(783)
ProxyH(5) 1 sockets selected from 4, total 4/0
2008/08/28 14:27:31.581 5 ProxyChannel.cxx(623) H245d
Reading from edge95:11016
2008/08/28 14:27:31.681 4 yasocket.cxx(656) H245d
edge95:11016 Error(0): Timeout
2008/08/28 14:27:31.693 5 yasocket.cxx(783)
ProxyH(5) 1 sockets selected from 4, total 4/0
2008/08/28 14:27:31.693 5 ProxyChannel.cxx(623) H245d
Reading from edge95:11016
2008/08/28 14:27:31.693 2 ProxyChannel.cxx(631) Proxy
edge95:11016 NOT TPKT PACKET!
2008/08/28 14:27:31.693 5 yasocket.cxx(783)
ProxyH(5) 1 sockets selected from 4, total 4/0
2008/08/28 14:27:31.693 5 ProxyChannel.cxx(623) H245d
Reading from edge95:11016
2008/08/28 14:27:31.693 2 ProxyChannel.cxx(631) Proxy
edge95:11016 NOT TPKT PACKET!
Syslog on the edge95 showed that the edge95 did receive and respond to the
request for terminalCapabilitySet from the gnugk227.
We have had many calls by Tandberg endpoints via the gnugk227 without problem
except for this particular model, Edge 95 MXP.
Any idea what could be cause of the Timeout and NOT TPKT PACKET?
Thanks in advance for all help.
Cheers,
Paul
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________________
Posting: mailto:[email protected]
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
