I've committed a fix for this issue to the cvs head. Please test it and report
whether it works (and does not break something).
----- Original Message -----
From: Paul Hii
To: [email protected]
Sent: Friday, September 19, 2008 3:01 AM
Subject: Re: [Openh323gk-users] Tandberg Edge 95 unable to
completenegotiation with gnugk227
Hi,
Thank you Jan Willamowius and Zygmuntowicz Michal for their suggestions.
I have now done a wireshark trace, this is the captured packet from the
Tandberg Edge 95 as received by the gatekeeper:
/*************/
Frame 59 (1179 bytes on wire, 1179 bytes captured)
Ethernet II, Src: Cisco_df: (), Dst: Ibm_71: ()
Internet Protocol, Src: srcip (srcip), Dst: dstip (dstip)
Transmission Control Protocol, Src Port: 5561 (5561), Dst Port: 14558
(14558), Seq: 3, Ack: 648, Len: 1113
Reassembled TCP Segments (1108 bytes): #57(2), #59(2), #59(1104)
TPKT, Version: 3, Length: 1108
H.245
TPKT, Version: 3, Length: 7
H.245
/*************/
Is it normal to have 2 TPKT wrappers?
Thanks,
Paul
From: [EMAIL PROTECTED]
To: [email protected]
Date: 05/09/2008 12:38 PM
Subject: Openh323gk-users Digest, Vol 28, Issue 3
------------------------------------------------------------------------------
------------------------------
Message: 3
Date: Fri, 05 Sep 2008 12:37:31 +1000
From: Paul Hii <[EMAIL PROTECTED]>
Subject: [Openh323gk-users] Tandberg Edge 95 unable to complete
negotiation with gnugk227
To: [email protected]
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
Hi,
we have been having an issue with a Tandberg Edge 95 MXP that is failing
to establish calls via our gnugk 2.2.7.
Tandberg Edge 95 MXP (Malaysia) --- gnugk227 (Australia) --- Tandberg 150
(Australia)
The gnugk227 is in routed mode and proxies all calls. Both the Edge 95 and
T150 are registered to the gnugk227.
The T150 initiated the call via the gnugk227 to Edge 95. The usual arq,
acf, q931 (setup, alert, connect) happens until the call connection failed
in the exchange of h245 terminalCapabilitySet.
Please see the gnugk log below:
2008/08/28 14:27:31.333 3 ProxyChannel.cxx(3719) H245 Connected
from T150:5559 on gnugk227:11473
2008/08/28 14:27:31.436 3 ProxyChannel.cxx(3751) H245 Connect to
edge95:11016 from gnugk227:0 successful
2008/08/28 14:27:31.436 5 ProxyChannel.cxx(5088) ProxyH(5) total
sockets 4
2008/08/28 14:27:31.437 5 job.cxx(426) JOB Job
H245Connector deleted
2008/08/28 14:27:31.437 5 job.cxx(415) JOB Worker
threads: 21 total - 19 busy, 2 idle
2008/08/28 14:27:31.511 5 yasocket.cxx(783) ProxyH(5) 1
sockets selected from 4, total 4/0
2008/08/28 14:27:31.511 5 ProxyChannel.cxx(623) H245s Reading
from T150:5559
2008/08/28 14:27:31.512 4 ProxyChannel.cxx(1093) H245 Received:
request terminalCapabilitySet {
.................
2008/08/28 14:27:31.513 4 ProxyChannel.cxx(4487) H245 Request:
terminalCapabilitySet
2008/08/28 14:27:31.581 5 yasocket.cxx(783) ProxyH(5) 1
sockets selected from 4, total 4/0
2008/08/28 14:27:31.581 5 ProxyChannel.cxx(623) H245d Reading
from edge95:11016
2008/08/28 14:27:31.681 4 yasocket.cxx(656) H245d edge95:11016
Error(0): Timeout
2008/08/28 14:27:31.693 5 yasocket.cxx(783) ProxyH(5) 1
sockets selected from 4, total 4/0
2008/08/28 14:27:31.693 5 ProxyChannel.cxx(623) H245d Reading
from edge95:11016
2008/08/28 14:27:31.693 2 ProxyChannel.cxx(631) Proxy edge95:11016
NOT TPKT PACKET!
2008/08/28 14:27:31.693 5 yasocket.cxx(783) ProxyH(5) 1
sockets selected from 4, total 4/0
2008/08/28 14:27:31.693 5 ProxyChannel.cxx(623) H245d Reading
from edge95:11016
2008/08/28 14:27:31.693 2 ProxyChannel.cxx(631) Proxy edge95:11016
NOT TPKT PACKET!
Syslog on the edge95 showed that the edge95 did receive and respond to the
request for terminalCapabilitySet from the gnugk227.
We have had many calls by Tandberg endpoints via the gnugk227 without
problem except for this particular model, Edge 95 MXP.
Any idea what could be cause of the Timeout and NOT TPKT PACKET?
Thanks in advance for all help.
Cheers,
Paul
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________________
Posting: mailto:[email protected]
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
