when invoking the GnuGk, give the commmand line option -c <Config File>
i.e.
GnuGk -c <ConfigFile>
Regards,
Vineet
On Mon, Jul 18, 2011 at 5:42 PM, Nagarathnam, Venkataraman <
venkataraman.nagarath...@polycom.com> wrote:
> Hi Jan,
>
> I telnetted the IP and what you said was true !!! The connection was
> denied.
> But the clients registered still with the extensions same as before. I
> tried renaming the gatekeeper.ini,
> Shutting down the GNU_GK etc : All same result !!! :(
>
> I tried looking in the manual in Section 4.2 for any config file
> related information.
> What should be the name of the config file and where do I configure for the
> file to be picked ???
> Please let me know.
>
> Thanks.
>
> Regards,
> Venkat.
>
>
> -----Original Message-----
> From: Jan Willamowius [mailto:j...@willamowius.de]
> Sent: Monday, July 18, 2011 5:04 PM
> To: openh323gk-users@lists.sourceforge.net
> Subject: Re: [Openh323gk-users] GNUGK config for making calls.
>
> Hi,
>
> are you sure GnuGk reads your config file ? Try telneting into the
> status port on port 7000. If thats denied, your config hasn't been read.
>
> Otherwise enable the trace file with level 5 and go through that to see
> what goes wrong.
>
> Regards,
> Jan
>
> Nagarathnam, Venkataraman wrote:
> > Hi Jan,
> >
> > Thanks for the quick reply !!! I went through the manual and
> made some changes to the gatekeeper.ini.
> > Still the same result. Please find below the settings in my ini file:
> >
> > ; this is a basic startup configuration for GnuGk
> > ; it allows anyone to register and make calls
> >
> > [Gatekeeper::Main]
> > FortyTwo=42
> > Name=GnuGk
> > ;TimeToLive=600
> > ; change this to 1 or 2, if you want CDRs and RAS messages to be printed
> on the status port
> > StatusTraceLevel=2
> > EndpointSignalPort=1720
> >
> > ; restrict access to the status port by an IP address
> > [GkStatus::Auth]
> > rule=allow
> > ; add more entries, if you access the status port from other hosts
> > default=allow
> > Shutdown=allow
> >
> > ;[RoutedMode]
> > ;GKRouted=1
> > ;H245Routed=1
> > ;AcceptNeighborsCalls=1
> > ;AcceptUnregisteredCalls=0
> > ;RemoveH245AddressOnTunneling=1
> > ;DropCallsByReleaseComplete=1
> > ;SendReleaseCompleteOnDRQ=1
> > ;SupportNATedEndpoints=1
> > ;CallSignalPort=1720
> > ;Q931PortRange=30000-39999
> > ;H245PortRange=40000-49999
> >
> > [RoutedMode]
> > GKRouted=1
> > H245Routed=1
> > AcceptNeighborsCalls=1
> > AcceptUnregisteredCalls=0
> > ;RemoveH245AddressOnTunneling=1
> > SupportNATedEndpoints=0
> > SupportCallingNATedEndpoints=1
> > DropCallsByReleaseComplete=1
> > CallSignalPort=1720
> > ;CallSignalHandlerNumber=5
> > ;RtpHandlerNumber=1
> > ;RemoveCallOnDRQ=1
> > ;SendReleaseCompleteOnDRQ=1
> > ;ScreenDisplayIE=
> > ;ScreenCallingPartyNumberIE=
> > ;ScreenSourceAddress=
> > ;ForwardOnFacility=1
> > ;ShowForwarderNumber=1
> > ;Q931PortRange=20000-20999
> > ;H245PortRange=30000-30999
> > ;SetupTimeout=8000
> > ;SignalTimeout=15000
> > ;AlertingTimeout=60000
> > ;TcpKeepAlive=1
> > ;TranslateFacility=1
> > ;SocketCleanupTimeout=5000
> > ;ActivateFailover=1
> > ;FailoverCauses=1-15,21-127
> > ;CpsLimit=10
> > ;CpsCheckInterval=5
> > GenerateCallProceeding=1
> > ;UseProvisionalRespToH245Tunneling=1
> > ;EnableH46018=1
> >
> > ; proxy calls only for NATed endpoints
> > ;[Proxy]
> > ;Enable=0
> > ; if port forwarding is correctly configured for each endpoint, you can
> disable ProxyForNAT
> > ;ProxyForNAT=1
> > ;ProxyForSameNAT=0
> >
> > [RoutingPolicy]
> > default=explicit,internal,parent,neighbor
> >
> > [RasSrv::GWPrefixes]
> > 172.24.132.156:1720=700
> > 172.24.132.244:1720=800
> >
> > ;[RasSrv::PermanentEndpoints]
> > ;10.240.44.124:1720=700
> >
> > ;[Endpoint]
> > ;Gatekeeper=no
> > ;Gatekeeper=auto
> > ;Gatekeeper=210.58.112.188
> > ;Type=Gateway
> > ;H323ID=CitronProxy
> > ;E164=18888600000
> > ;Password=123456
> > ;Prefix=18888600,1888890003
> > ;TimeToLive=900
> > ;RRQRetryInterval=10
> > ;UnregisterOnReload=0
> > ;NATRetryInterval=60
> > ;NATKeepaliveInterval=86400
> > ;Discovery=1
> > ;GatekeeperIdentifier=ParentGKId
> > ;UseAlternateGK=1
> > ;EndpointIdentifier=ChildGKId
> > ;Vendor=Cisco
> >
> > [RasSrv::RRQFeatures]
> > OverwriteEPOnSameAddress=1
> > AcceptEndpointIdentifier=1
> > AcceptGatewayPrefixes=1
> > IRQPollCount=0
> > AliasTypeFilter=terminal;dialeddigits
> >
> >
> > [RasSrv::RRQAuth]
> > 700=sigip:10.240.44.124:1720
> > 800=sigip:172.24.132.244:1720
> > default=confirm
> >
> > [CallTable]
> > GenerateNBCDR=TRUE
> > GenerateUCCDR=TRUE
> > DefaultCallDurationLimit=21600
> > AcctUpdateInterval=0
> > TimestampFormat=RFC822
> > IRRFrequency=120
> > IRRCheck=FALSE
> > SingleFailoverCDR=0
> >
> >
> > [H225toQ931]
> > 0=34 # noBandwidth
> > 1=47 # gatekeeperResources
> > 2=3 # unreachableDestination
> > 3=16 # destinationRejection
> > 4=88 # invalidRevision
> > 5=111 # noPermission
> > 6=38 # unreachableGatekeeper
> > 7=42 # gatewayResources
> > 8=28 # badFormatAddress
> > 9=41 # adaptiveBusy
> > 10=17 # inConf
> > 11=31 # undefinedReason
> > 12=16 # facilityCallDeflection
> > 13=31 # securityDenied
> > 14=20 # calledPartyNotRegistered
> > 15=31 # callerNotRegistered
> > 16=47 # newConnectionNeeded
> > 17=127 # nonStandardReason
> > 18=31 # replaceWithConferenceInvite
> > 19=31 # genericDataReason
> > 20=31 # neededFeatureNotSupported
> > 21=127 # tunnelledSignallingRejected
> >
> >
> > ;[ModeSelection]
> > ;172.24.0.0/18=H245ROUTED,ROUTED
> >
> > Do you find anything absurd here ???
> >
> > Thanks.
> > Venkat.
> >
> > From: Nagarathnam, Venkataraman
> > Sent: Monday, July 18, 2011 1:47 PM
> > To: 'openh323gk-users@lists.sourceforge.net'
> > Subject: GNUGK config for making calls.
> >
> > Hi All,
> >
> > I have installed the GNU_GK for Windows XP platform. I also
> have Yate client installed onto this GNU_GK.
> > Currently I am facing the below problems:
> >
> > 1 - When I register a Yate client / any other hard IP phone, I just get
> the RAS messages, No Q.931 / H.245 messages.
> > 2 - When I try to place calls between two Yate H323 clients, there is no
> RTP flow (obviously since the Q.931 messages did not pass).
> >
> > Please let me know if I need to do any extra config to
> establish a successful call.
> > Currently I am trying to install OpenMCU to see if I can play around with
> it.
> >
> > I can paste my gatekeeper.ini config here if necessary.
> >
> > Thanks.
> >
> > Regards,
> > Venkat.
>
>
> --
> Jan Willamowius, j...@willamowius.de, http://www.gnugk.org/
>
>
> ------------------------------------------------------------------------------
> AppSumo Presents a FREE Video for the SourceForge Community by Eric
> Ries, the creator of the Lean Startup Methodology on "Lean Startup
> Secrets Revealed." This video shows you how to validate your ideas,
> optimize your ideas and identify your business strategy.
> http://p.sf.net/sfu/appsumosfdev2dev
> _______________________________________________________
>
> Posting: mailto:Openh323gk-users@lists.sourceforge.net
> Archive:
> http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
> Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> Homepage: http://www.gnugk.org/
>
>
> ------------------------------------------------------------------------------
> AppSumo Presents a FREE Video for the SourceForge Community by Eric
> Ries, the creator of the Lean Startup Methodology on "Lean Startup
> Secrets Revealed." This video shows you how to validate your ideas,
> optimize your ideas and identify your business strategy.
> http://p.sf.net/sfu/appsumosfdev2dev
> _______________________________________________________
>
> Posting: mailto:Openh323gk-users@lists.sourceforge.net
> Archive:
> http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
> Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> Homepage: http://www.gnugk.org/
>
------------------------------------------------------------------------------
AppSumo Presents a FREE Video for the SourceForge Community by Eric
Ries, the creator of the Lean Startup Methodology on "Lean Startup
Secrets Revealed." This video shows you how to validate your ideas,
optimize your ideas and identify your business strategy.
http://p.sf.net/sfu/appsumosfdev2dev
_______________________________________________________
Posting: mailto:Openh323gk-users@lists.sourceforge.net
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
