Hello all,

From time to time my GnuGK will start having issues and when I check the log I 
see thousands of entries like this;
2011/11/01 12:35:07.652 3 ProxyChannel.cxx(5887) RTCP 
CodianMCUip:61923<=>GnuGKip:1069<=>EndpointIP:2473 socket has no destination 
address yet, flush ignored

In today's connection, these messages started appearing within 2 seconds of the 
connection being initiated. There was one entry (as per above) and then;
2011/11/01 11:58:03.665 3     ProxyChannel.cxx(7153)  Proxy 
CodianMCUip:61923<=> GnuGKip:1069<=> EndpointIP:2473 forward blocked
Followed by thousands of entries.

Disconnecting and then reconnecting, twice, did not resolve the issue.

Sometimes the connection between the Endpoint and the MCU will hold up, but in 
the main, the connection will ultimately drop.

The Codian MCU is a 4505 (firmware is up to date).
The endpoint is a Cisco/Tandberg C60 and the firmware is up to date.
I understand that the Gatekeeper version is 2.3.4

The Gatekeeper config is (edited version, to remove internal IPs);

[Gatekeeper::Main]
TotalBandwith=-1
Fourtytwo=42
Name=gatekeeper...
Home=GatekeperIP
Bind=GatekeeperIP
EndpointIDSuffix=_details
TimeToLive=300
DefaultDomain=default
CompareAliasCase=0

[RoutedMode]
GKRouted=1
CallSignalPort=1720
AcceptNeighborsCalls=1
AcceptUnregisteredCalls=1
DropCallsByReleaseComplete=1
SendReleaseCompleteOnDRQ=1

[RoutingPolicy]
default=explicit,internal,enum,srv,dns,parent,neighbor

[Proxy]
Enable=1
InternalNetwork=IPrange

[GKStatus::Auth]
regex=^IPrange
FileIPAuth=required;RRQ,LRQ,Setup
rule=regex

[FileIPAuth]
any=allow

AARNet-a-gk1=AARNet:1719;*;

[Endpoint]
Type=Gateway
Gatekeeper=AARNet
Vendor=Cisco
H323ID=FlindersGK
Prefix=prefix
E164=E.164#

RRQRetryInterval=10
TimeToLive=900
Discovery=0

UnregisterOnReload=1

[RasSrv::ARQFeatures]
CallUnregisteredEndpoints=1

[RasSrv::LRQFeatures]
IncludeDestinationInfoInLCF=1

[CallTable]
DefaultCallTimeout=0
GenerateNBCDR=1
GenerateUCCDR=1
AcctUpdateInterval=0

[Gatekeeper::Acct]
FileAcct=required;start,update,stop,on,off
default=accept

[FileAcct]
DetailFile=/var/log/acct.log
Rotate=0

END

Any clues on what might be happening?
Where should I be directing my attention to resolve this issue?

Des Gellert
Audio Visual / ICT Officer
Flinders NT Medical Program
1st Floor Yellow Wing, Building 4, Royal Darwin Hospital Campus, Tiwi NT 0810
PO Box 41326, Casuarina NT 0811
p: (08) 8922 6918,  f: (08) 8922 9728  and  m: 0400 794 125

Before you print, please think. Do I really need a hard copy of this message?

------------------------------------------------------------------------------
RSA&reg; Conference 2012
Save &#36;700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________________

Posting: mailto:Openh323gk-users@lists.sourceforge.net
Archive: 
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

Reply via email to