Hi All,
I wonder if you could advise me if GnuGK can do anything about the below problem. I have a Cisco 45xx MCU and a Cisco TCS (Content Server) registered to my GnuGK 3.0.2. MCU is registered as a gateway, TCS as a terminal. I use routed signalling, but H.245 is not routed. When starting an MCU conference recording with TCS H.239 channel is not established for all call scenarios and seemingly it depends on calling alias or IP or enabling/disabling GnuGK registration. Here are my scenarios: Both MCU and TCS is registered to GnuGK: Call from MCU to TCS: - I call IP address: H.239: on - I call TCS alias: H.239: off Call from TCS to MCU: - I call IP address: H.239: off - I call alias: H.239: off Then I remove TCS from my gatekeeper and repeat the calls. This happens: Call from TCS to MCU: H.239: on Call from MCU to TCS: H.239: on This is somewhat strange to me, as the gatekeeper should not do anything with H.239 channel that is set up between the two remote parties directly... I wonder if I could check anything on GnuGK side. I also opened a support ticket at Cisco. Thanks. Best regards, Andras Kovacs ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________________ Posting: mailto:Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
