Hello Jan,
Thanks for the reply! yes I reset the open files and other parameters
of my linux_PC, and until now I already can do 210 concurrent calls,
Thanks!
Regards,
Bo Xu
Hi,
GnuGk doesn't have a built-in limit. Check your trace file, you'll
probably see errors indicating insufficient sockets or file handles.
If you use Linux, ulimit -n is your friend.
Regards,
Jan
--
Jan Willamowius, Founder of the GNU Gatekeeper Project
EMail : jan@...
Website: http://www.gnugk.org
Support: http://www.willamowius.com/gnugk-support.html
Relaxed Communications GmbH
Frahmredder 91
22393 Hamburg
Geschäftsführer: Jan Willamowius
HRB 125261 (Amtsgericht Hamburg)
USt-IdNr: DE286003584
Bo Xu wrote:
> Hi,
>
> I am doing stress testing of the maximum connection number of
> gnuGK(H.460.18/19 enabled) now. with gnuGK3.6(H.460.18/19 enabled) I can
> connect 124 terminal-simulators into our MCU through gnuGK3.6, but I cannot
> connect more terminals in, the CPU usage of gnuGK is stable at about 65%,
> so I think it is still possible to add more terminals in, but I cannot. is
> there any maximum connection limitation for gnuGK3.6? is there a parameter
> in the config file so I can set it and increase it? Thanks!
>
> Regards,
> Bo Xu
On Wed, May 7, 2014 at 4:15 PM, Bo Xu <boxuscie...@gmail.com> wrote:
> Hi,
>
> I got more details for this: in my testing when the concurrent connections
> through gnuGK-3.6(H.460.18/19 enabled) reached about 130, then when I tried
> to connection one more terminal in, Wireshark shows that gnuGK sent out a
> ReleaseComplete message thus the call is failed; at this time if I
> disconnect one call and join that terminal again, then it is successfully.
> it seems that when the concurrent calls reach a specific value(in my
> testing it is about 130), then gnuGK will send out ReleaseComplete message
> for the new call. could you give me some clues why this will happen? which
> part of the source code I need to read for this? can I control it by
> config-file? Thanks!
>
> Regards,
> Bo Xu
>
>
>
>
>
> On Wed, May 7, 2014 at 1:59 PM, Bo Xu <boxuscie...@gmail.com> wrote:
>
>> Hi,
>>
>> I am doing stress testing of the maximum connection number of
>> gnuGK(H.460.18/19 enabled) now. with gnuGK3.6(H.460.18/19 enabled) I can
>> connect 124 terminal-simulators into our MCU through gnuGK3.6, but I cannot
>> connect more terminals in, the CPU usage of gnuGK is stable at about 65%,
>> so I think it is still possible to add more terminals in, but I cannot. is
>> there any maximum connection limitation for gnuGK3.6? is there a parameter
>> in the config file so I can set it and increase it? Thanks!
>>
>> Regards,
>> Bo Xu
>>
>
>
------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce
_______________________________________________________
Posting: mailto:Openh323gk-users@lists.sourceforge.net
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
