Hi,
I have a GnuGK with H.460.18 enabled, and terminal-A and terminal-B all
register to that GnuGK, and terminal-A is behind NAT.
when terminal-A(NATed) calls terminal-B everything works fine, but when
terminal-B calls terminal-A(NATed), from the wireshark in terminal-A, I saw:
GnuGK sent SCI to terminal-A(NATed)'s 1719-port
terminal-A(NATed) sent SCR to GnuGK's 1719-port
then terminal-A(NATed) sent facility to GnuGK's 1720-port(I set GnuGK use
1720 as CallSignalPort)
but after that, GnuGK didn't sent Setup messge back to terminal-A(NATed) as
mentioned here:
http://www.gnugk.org/nat-traversal.html
I guess the facility massage terminal-A(NATed) sent to GnuGK might not be
correct so GnuGK refuse to sent Setup back, could you give me a sample of
the correct facility messge? is there other issue in what I did in the
above? it is right for terminal-A(NATed) sent facility-message to GnuGK's
1720-port? Thanks!
Regards,
Bo Xu
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________________
Posting: mailto:Openh323gk-users@lists.sourceforge.net
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
