Hello Jan,

thanks for your answer.
I think i did not describe it with enough details:

My Network is like the following:

2 dedicated Videoconferencing Systems in my LAN with a private IP 
(192.168.88.x) behind one Router with only one public IP Address (79.142.35.177)
I have an gnugk instance installed infront of my Firewall. The dedicated 
systems register themselves without any Problems on the gnugk.
Then I try to call a public MCU bridge with a public IP. The first system from 
which I call the MCU is able to connect, no matter which system I use. The 
second system is not able to connect, it get a "disconnect" and can't connect 
to the MCU.
As you now, my gnugk configuration is very basic, so I think I am missing some 
points to make it happen that 2 systems in on LAN can connect through one 
public IP on a public MCU.
I hope you understood my network now. Are there any config Options which I 
should use to make it work?

Best Regards,
Jürgen

-----Ursprüngliche Nachricht-----
Von: Jan Willamowius [mailto:j...@willamowius.de] 
Gesendet: Donnerstag, 7. April 2016 16:57
An: openh323gk-users@lists.sourceforge.net
Betreff: Re: [Openh323gk-users] GnuGK 2 Endpoints behind NAT

Hi Jürgen,

you don't need more than 1 public IP if you have multiple endpoints.
But your description sounds like you have placed your GnuGk inside your 
firewall / NAT and thats not a good place for it. It seems like sheer luck that 
one of your endpoints works.

The best place for GnuGk is outside your firewall. Then all your endpoints can 
live on private IPs and use H.460 NAT traversal to connect to GnuGk can dial 
out or be called from the internet.

The other option is to configure port forwarding between your router with the 
public IP and GnuGk. But it is much more error prone and I generally don't 
recommend it.

Regards,
Jan

--
Jan Willamowius, Founder of the GNU Gatekeeper Project EMail  : 
j...@willamowius.de
Website: http://www.gnugk.org
Support: http://www.willamowius.com/gnugk-support.html

Relaxed Communications GmbH
Frahmredder 91
22393 Hamburg
Geschäftsführer: Jan Willamowius
HRB 125261 (Amtsgericht Hamburg)
USt-IdNr: DE286003584


Jürgen Wendler wrote:
> Greetings,
> 
> i have a simple quick question which i can't figure out myself:
> 
> I have a small private network which has one Router and only one 
> public IP from my ISP. In this very small network I have 2 videoconferencing 
> systems from sony (xg80 and xg100). Both are connected to the gnugk, I've 
> setup no authentication (not on gnugk side or on sony side) When I call a MCU 
> outside my network through the gnugk from one of both systems (doesn't matter 
> which system) I get connected. When I call with second system afterwards, I 
> can't get connected.
> Now my question:
> Is it possible to have 2 or more systems behind a router with only one public 
> IP and let them connect to a MCU (Tandberg, cisco e.g.) or do I need a second 
> public IP?
> 
> Here is my very basic config for gnugk:
> 
> [Gatekeeper::Main]
> Name=VisionGatekeeper
> EndpointIDSuffix=_vision7639288
> 
> [GkStatus::Auth]
> rule=password
> admin=UZdh380=8
> 
> [RoutedMode]
> GKRouted=1
> H245Routed=1
> CallSignalPort=1721
> AcceptUnregisteredCalls=1
> RemoveH245AddressOnTunneling=0
> RemoveH245AddressFromSetup=0
> SupportNATedEndpoints=1
> TreatUnregisteredNAT=1
> GenerateCallProceeding=1
> EnableH46018=1
> AlwaysRewriteSourceCallSignalAddress=1
> 
> [Proxy]
> Enable=1
> ProxyAlways=1
> 
> [ReplyToRasAddress]
> 79.142.35.0/24=True
> 
> My Public IP is: 79.142.35.177
> 
> Here is the log snippet that is needed I think....or do I have to configure 
> something else on gnugk?
> 
> 2016/04/06 10:27:49.491 1             RasSrv.cxx(393)   RAS     ARQ Received 
> from 79.142.35.177:29620
> 2016/04/06 10:27:49.491 3             RasSrv.cxx(3120)  Reply to saved 
> rasAddress:79.142.35.177:29620
> 2016/04/06 10:27:49.491 3             RasSrv.cxx(3396)  GK      ACF will 
> grant bandwidth of 20480
> 2016/04/06 10:27:49.492 2             RasTbl.cxx(4746)  
> CallTable::Insert(CALL) Call No. 1, total sessions : 1
> 2016/04/06 10:27:49.492 2             RasSrv.cxx(446)   
> ACF|79.142.35.177:29620|3873891045_vision7639288|23091|511:dialedDigits|3873891045_vision7639288:h323_ID|false|30-40-de-6c-20-01-00-1f-24-08-a1-c6-87-b4-dd-53|ToBeDecided;
> 2016/04/06 10:27:49.492 3             RasSrv.cxx(266)   RAS     Send to 
> 79.142.35.177:29620
> 
> 2016/04/06 10:27:49.558 3       ProxyChannel.cxx(1878)  Q931s   Received: 
> Setup CRV=23091 from 79.142.35.177:57347
> 2016/04/06 10:27:49.559 2             gkacct.cxx(965)   GKACCT  Successfully 
> logged event 1 for call no. 1
> 2016/04/06 10:27:49.559 3       ProxyChannel.cxx(4811)  GK      Call 1 proxy 
> enabled (H.460.18/.19)
> 2016/04/06 10:27:49.560 3       ProxyChannel.cxx(5155)  Q931s   Call 1 is NAT 
> type 1
> 2016/04/06 10:27:49.560 3       ProxyChannel.cxx(1592)  GK      Call 1 proxy 
> enabled. (ProxyAlways)
> 2016/04/06 10:27:49.560 1       ProxyChannel.cxx(1634)  Call 1: h245Routed=1 
> proxy=1
> 2016/04/06 10:27:49.560 3       ProxyChannel.cxx(1672)  GK      Call 1 proxy 
> enabled
> 2016/04/06 10:27:49.562 3       ProxyChannel.cxx(8093)  Q931    Connect to 
> 79.142.32.144:1720 from 79.142.32.168:0 successful
> 2016/04/06 10:27:49.708 3       ProxyChannel.cxx(1878)  Q931d   Received: 
> Alerting CRV=23091 from 79.142.32.144:1720
> 2016/04/06 10:27:49.708 2             gkacct.cxx(965)   GKACCT  Successfully 
> logged event 64 for call no. 1
> 2016/04/06 10:27:49.717 3       ProxyChannel.cxx(1878)  Q931d   Received: 
> Connect CRV=23091 from 79.142.32.144:1720
> 2016/04/06 10:27:49.718 2             gkacct.cxx(965)   GKACCT  Successfully 
> logged event 32 for call no. 1
> 2016/04/06 10:27:49.718 3       ProxyChannel.cxx(8896)  H245    Set 
> h245Address to 79.142.32.168:59676
> 2016/04/06 10:27:49.790 3       ProxyChannel.cxx(8776)  H245    Connected 
> from 79.142.35.177:22833 on 79.142.32.168:59676
> 2016/04/06 10:27:49.791 3       ProxyChannel.cxx(8809)  H245    Connect to 
> 79.142.32.144:5601 from 79.142.32.168:0 successful
> 2016/04/06 10:27:49.793 2             RasSrv.cxx(177)   RAS     Read from 
> 79.142.35.177:29620
> 
> 2016/04/06 10:27:49.793 1             RasSrv.cxx(393)   RAS     BRQ Received 
> from 79.142.35.177:29620
> 2016/04/06 10:27:49.793 3             RasSrv.cxx(3787)  Reply to saved 
> rasAddress:79.142.35.177:29620
> 2016/04/06 10:27:49.793 2             RasSrv.cxx(446)   
> BCF|79.142.35.177|3873891045_vision7639288|20480;
> 2016/04/06 10:27:49.793 3             RasSrv.cxx(266)   RAS     Send to 
> 79.142.35.177:29620
> 
> 
> 2016/04/06 10:28:03.652 1             RasSrv.cxx(393)   RAS     ARQ Received 
> from 79.142.35.177:9101
> 2016/04/06 10:28:03.653 3             RasSrv.cxx(3120)  Reply to saved 
> rasAddress:79.142.35.177:9101
> 2016/04/06 10:28:03.653 3             RasSrv.cxx(3396)  GK      ACF will 
> grant bandwidth of 20480
> 2016/04/06 10:28:03.653 2             RasTbl.cxx(4746)  
> CallTable::Insert(CALL) Call No. 2, total sessions : 2
> 2016/04/06 10:28:03.654 2             RasSrv.cxx(446)   
> ACF|79.142.35.177:9101|3142736620_vision7639288|3696|511:dialedDigits|3142736620_vision7639288:h323_ID|false|f5-7a-31-dc-3c-05-00-1f-05-17-04-ed-22-b3-70-e9|ToBeDecided;
> 2016/04/06 10:28:03.654 3             RasSrv.cxx(266)   RAS     Send to 
> 79.142.35.177:9101
> 
> 
> 2016/04/06 10:28:07.659 1             RasSrv.cxx(393)   RAS     ARQ Received 
> from 79.142.35.177:9101
> 2016/04/06 10:28:07.659 3             RasSrv.cxx(3120)  Reply to saved 
> rasAddress:79.142.35.177:9101
> 2016/04/06 10:28:07.660 3             RasSrv.cxx(3396)  GK      ACF will 
> grant bandwidth of 20480
> 2016/04/06 10:28:07.660 3             RasSrv.cxx(3440)  GK      ACF: found 
> existing call no 2
> 2016/04/06 10:28:07.660 2             RasSrv.cxx(446)   
> ACF|79.142.35.177:9101|3142736620_vision7639288|3696|511:dialedDigits|3142736620_vision7639288:h323_ID|false|f5-7a-31-dc-3c-05-00-1f-05-17-04-ed-22-b3-70-e9|
>  ;
> 2016/04/06 10:28:07.660 3             RasSrv.cxx(266)   RAS     Send to 
> 79.142.35.177:9101
> 
> Can anyone point me to the right direction or give me a hint where I need to 
> look for?
> 
> Thanks in advance
> 
> Jürgen


------------------------------------------------------------------------------
_______________________________________________________

Posting: mailto:Openh323gk-users@lists.sourceforge.net
Archive: 
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

------------------------------------------------------------------------------
_______________________________________________________

Posting: mailto:Openh323gk-users@lists.sourceforge.net
Archive: 
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

Reply via email to