Hi Dmitry, you should switch the status port to trace level 0 (thats a different trace level than the regular trace). Then you'll only see responses to the commands you issue, not the other events from your calls.
You can add the "trace 0" command to your scripts or set the trace level in your config file (StatusTraceLevel=0). Regards, Jan -- Jan Willamowius, Founder of the GNU Gatekeeper Project EMail : j...@willamowius.de Website: http://www.gnugk.org Support: http://www.willamowius.com/gnugk-support.html Relaxed Communications GmbH Frahmredder 91 22393 Hamburg Geschäftsführer: Jan Willamowius HRB 125261 (Amtsgericht Hamburg) USt-IdNr: DE286003584 Dmitry Melekhov wrote: > Hello! > > I run gnugk 4.0.1 and have some scripts which connects to gnugk console > by schedule and get and report some status. > > All worked OK for years, but number of calls grows, and looks like > sometimes gnugk outputs some call info during command execution. > > Let's say script says r to get number of endpoints , but looks like > gnugk says current calls info before it handles command, so script fails. > > Is it possible or I have another type of problem? > > > Thank you! ------------------------------------------------------------------------------ _______________________________________________________ Posting: mailto:Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
