I'm sorry. I'm not understanding.
Can you show me the output again?, but include all of it and include the
commands you type in order.
So I expect to see:
first command
output of first command
second command
output of second command
....etc....
Saludos,
--Renier
"Prakash, Amit" <[EMAIL PROTECTED]> wrote on 04/27/2007 03:41:29 PM:
> No actually I am trying to start opehpi-subagent which takes around
> 15mins to start, During the start process when we see the status
> with the command ?./openhpi-subagent start? it shows
> hpisubagent is running and after the start that is [ok] when we see
> the status with the command ?./openhpi-subagent status? it says
> hpisubagent stopped.
>
>
> From: Renier Morales [mailto:[EMAIL PROTECTED]
> Sent: Friday, April 27, 2007 12:12 PM
> To: Prakash, Amit
> Cc: [email protected]
> Subject: RE: [Openhpi-devel] Installation Issue
>
>
> You are starting both /usr/sbin/hpisubagent and
/etc/init.d/openhpi-subagent ?
>
> --Renier
>
> "Prakash, Amit" <[EMAIL PROTECTED]> wrote on 04/26/2007 01:51:48 PM:
>
> > Hi,
> > We are installing snmp-subagent on a server that?s Mullins (Intel
name) box.
> >
> > We made changes in the snmpd.conf file, and tried starting
> > hpisubagent(in the directory bin) and the openhpi-subagent( in the
> > directory etc/init.d).
> >
> > When we put the command ?./openhpi-subagent start? it takes around
> > 15mins(and the beginning statement we get is ?we are here Starting
> > up HPI SNMP sub-agent daemon:?) .
> >
> > Where as starting hpisubagent goes in an infinite loop, and get the
> > output as below.
> >
> > Please let me know if you need any other info.
> >
> > Thanks
> > -Amit
> >
> >
> > hpiSubagent: populate_saHpiSensorEventLogTable, called
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
3
> > hpiSubagent: build_full_oid() called
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
4
> > hpiSubagent: saHpiSensorEventLogTable_extract_index, called
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
5
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 4
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 3
> > populate_saHpiResourceEventLogTable: oh_decode_sensorreading,
> > TriggerReading error!populate_saHpiResourceEventLogTable:
> > oh_decode_sensorreading TriggerReading error!hpiSubagent: Released
> > the lock, 0x9287ff8 - lockcount 2
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
3
> > hpiSubagent: saHpiEventLogTable_extract_index, called
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
4
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 3
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 2
> > Entry ID [7924]
> > EventType [7]
> > rv [0]
> > SAHPI_ET_OEM: rv [0]
> >
> > hpiSubagent: populate_saHpiOemEventLogTable, called
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
3
> > hpiSubagent: build_full_oid() called
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
4
> > hpiSubagent: saHpiOemEventLogTable_extract_index, called
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
5
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 4
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 3
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 2
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
3
> > hpiSubagent: saHpiEventLogTable_extract_index, called
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
4
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 3
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 2
> > Entry ID [7944]
> > EventType [2]
> > rv [0]
> > SAHPI_ET_SENSOR: rv [0]
> > Sensor Type: [SYSTEM_ACPI_POWER_STATE]
> >
> > Another repeated part of the table is
> >
> > EVENT LOG TABLES
> > hpiSubagent: event_log_clear, called
> > event_log_clear: done
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
2
> > Entry ID [0]
> > EventType [0]
> > rv [-1011]
> > hpiSubagent: Domain Event Log Empty
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 1
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 0
> > hpiSubagent: Running in nonthreaded mode. Configuring polling
mechanism
> > hpiSubagent: init_alarm: Entry
> > hpiSubagent: Polling events every 5 seconds
> > hpiSubagent: Got the lock because no one had it. 0x9287ff8 - lockcount
1
> > hpiSubagent: Released the lock, 0x9287ff8 - lockcount 0
> > hpiSubagent: init_alarm: Exit
> >
> > hpiSubagent: do_alarm: Entry
> > hpiSubagent: event_log_info_update called
> > hpiSubagent: SA_ERR_HPI_CAPABILITY: event_log_info_update Failed: rv =
-1020
> > hpiSubagent: SA_ERR_HPI_CAPABILITY: event_log_info_update Failed: rv =
-1020
> > hpiSubagent: SA_ERR_HPI_CAPABILITY: event_log_info_update Failed: rv =
-1020
> > hpiSubagent: SA_ERR_HPI_CAPABILITY: event_log_info_update Failed: rv =
-1020
> > hpiSubagent: do_alarm: Exit
> >
> >
> >
> > From: Renier Morales [mailto:[EMAIL PROTECTED]
> > Sent: Thursday, April 26, 2007 12:35 PM
> > To: Prakash, Amit
> > Subject: Re: [Openhpi-devel] Installation Issue
> >
> >
> > "Prakash, Amit" <[EMAIL PROTECTED]> wrote on 04/25/2007 05:13:50
PM:
> >
> > > Hi,
> > > Here we are trying to install openhpi-subagent and when we start it
> > > takes around 15 mins to start. I would like to know whether it will
> > > create any problem. Or, does it take so long to start.
> > > Waiting for your reply.
> > > Thnaks
> > > -Amit.
> >
> >
> > What do you mean it takes 15 mins to start? What exactly are you
> experiencing?
> > What system are you using? What OpenHPI plugin?
> >
> > --Renier-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Openhpi-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openhpi-devel
