John,
I believe an answer to your question can be found in the mailing list
archives. Would you search there and if you still have questions let me
know.
Regards
David J.
Fulreader, John wrote:
Hi,
I have been testing the openHPI subagent to verify its ability to
send traps. I am able to cause events to occur by changing a sensor
"Upper Minor" threshold for my power supply, but am unable to see a
trap generated for the event. Details of the sensor and thresholds are:
RPT number: 3
RPT id = 3 RDR id = 131184 sensornum = 112 Data = PS1 Status0
RPT id = 3 RDR id = 131192 sensornum = 120 Data = PS1 AC Current
RPT id = 3 RDR id = 131194 sensornum = 122 Data = PS1 +12V Current
RPT id = 3 RDR id = 131196 sensornum = 124 Data = PS1 +12V Power
Sensor number: 120
RecordId: 131192
RdrType: SENSOR_RDR
Entity Path: {SYSTEM_CHASSIS,6}{SYS_MGMNT_MODULE,32}{POWER_SUPPLY,1}
IsFru: FALSE
Sensor Num: 120 (78 hex)
Type: CURRENT
Category: THRESHOLD
EnableCtrl: TRUE
EventCtrl: PER_EVENT
Events: UPPER_MINOR | UPPER_MAJOR
Data Format:
IsSupported: TRUE
Reading Type: FLOAT64
Base Unit: Amps
Percentage: FALSE
Range Max: 31.875 Amps
Range Min: 0.000 Amps
Range Nominal: 8.875 Amps
Range Normal Max: 9.875 Amps
Range Normal Min: 0.875 Amps
Accuracy: 1.080000
Threshold Definitions:
IsAccessible: TRUE
Readable Thresholds:
LOW_HYSTERESIS | UP_MINOR | UP_MAJOR | UP_HYSTERESIS
Writeable Thresholds:
LOW_HYSTERESIS | UP_MINOR | UP_MAJOR | UP_HYSTERESIS
Nonlinear: FALSE
OEM: 0
IdString:
Data Type: TEXT
Language: ENGLISH
Data Length: 14
Data: PS1 AC Current
Reading value: 0.625 Amps
Thresholds:
Supported Thresholds:
11.125 Upper Major Threshold(ua):
0.500 Upper Minor Threshold(ui):
0.250 Positive Threshold Hysteresis(ph):
0.250 Negative Threshold Hysteresis(nh):
When an event occurs, I am able to see a new entry for the event
stored in the saHpiEventEntry table, but am also expecting to see a
trap relating to this event. In fact I do not see any traps from the
openHPI subagent. My subagent config file is as follows:
cat /etc/snmp/hpiSubagent.conf
# Should EVENTS be sent during startup for new found
# RPT and RDR entries
#
# on|off
send_traps_on_startup on
# Check the HPI API for changes. In seconds.
#check_hpi_interval 60
# Maximum number of event rows.
max_event_rows 1024
I am able to receive warmstart traps from the snmpd and have opened a
local snmptrapd session to view those traps. My snmpd.conf contains
following trap2sink command:
trap2sink 127.0.0.1 public
I know that the subagent is able to communicate with the snmpd and see
connection errors in the hpiSubagent log after bringing down snmpd.
Is there some additional configuration that I need to do to enable
openHpi subagent traps?
Thank you,
John Fulreader
------------------------------------------------------------------------
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
------------------------------------------------------------------------
_______________________________________________
Openhpi-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openhpi-devel
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Openhpi-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openhpi-devel
