Hi,
I had not paid attention to your openhpi.conf but I see in the plugin log
file that you are trying to manage hotswap through the system interface of
your ATCA board. The plugin does not support that. All hotswap activity must
be handled through the Shelf Manager using RMCP to connect to it.
Pierre
_____
From: Nancy Chen [mailto:[EMAIL PROTECTED]
Sent: Monday, September 24, 2007 16:16
To: Pierre Sangouard
Subject: FW: [Openhpi-devel] AMC hotswap events
Hello Pierre,
Those files are too big for the list, so I am sending them to
you.
Thanks,
Nancy
_____
From: Nancy Chen
Sent: Monday, September 24, 2007 10:14 AM
To: '[email protected]'
Subject: RE: [Openhpi-devel] AMC hotswap events
Attached are ipmidirect04.log and hpitree.log (text files). Let's see if
this could get through.
Thanks,
Nancy
_____
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Pierre
Sangouard
Sent: Monday, September 24, 2007 2:44 AM
To: [email protected]
Subject: Re: [Openhpi-devel] AMC hotswap events
I would need also the output of hpitree command.
Thanks,
Pierre
_____
From: Pierre Sangouard [mailto:[EMAIL PROTECTED]
Sent: Monday, September 24, 2007 08:44
To: '[email protected]'
Subject: RE: [Openhpi-devel] AMC hotswap events
I would need the plugin log file of the corresponding session to help you.
If it's to big for the list you can send it directly to me.
_____
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nancy Chen
Sent: Saturday, September 22, 2007 17:33
To: [email protected]
Subject: Re: [Openhpi-devel] AMC hotswap events
Thanks Pierre for the quick reply. This is good to know, but I don't think I
am there yet. Maybe I should be a bit more specific on the problem that I am
seeing now. My AMC board is already inserted into my ATCA blade before
powering up. After the system is up, I pull the plug on my AMC board, the
blue led is blinking. Before I pulled the plug, I run hpievents with -t
BLOCK option, but hpievents never get any events back. My log file is
showing me some events, but complained "hotswap event without a MC". One
thing about the ATCA blade that I am using is that it is Kontron (8020)
blade. If I use ipmi_ui command to list all the entities, it only show some
FRUs, but no MCs. Could this be the problem?
Thanks again for your help,
Nancy
_____
From: [EMAIL PROTECTED] on behalf of Pierre
Sangouard
Sent: Sat 9/22/2007 5:02 AM
To: [email protected]
Subject: Re: [Openhpi-devel] AMC hotswap events
Hot swap of FRUs other than FRU #0 does not work at this point (See bug
#1794820). By the way, you should remove the last 2 lines of your
openhpi.conf file since there is no need for the plugin to poll MCs in ATCA
systems - it's done by the Shelf Manager - and MC 0x20 is always polled by
default.
Pierre
_____
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nancy Chen
Sent: Friday, September 21, 2007 21:04
To: [email protected];
[EMAIL PROTECTED]
Subject: [Openhpi-devel] AMC hotswap events
I am trying to write a simple AMC hotswap application. I can see through
debugging messages, ipmidirect plugin code already goes into
cIpmiMcThread::HandleEvent(), but I keep getting "hotswap event without a MC
!". What does it mean? Do I have the correct configuration file? Here is my
openhpi.conf. I am running with version 2.4.1.
handler libipmidirect {
entity_root = "{SYSTEM_CHASSIS,6}"
name = "smi"
addr = 0
logflags = "file" # logging off
# logflags = "file stdout"
# infos goes to logfile and stdout
# the logfile are log00.log, log01.log ...
logfile = "/var/log/ipmidirect"
# if #logfile_max reached replace the oldest one
logfile_max = "10"
# IpmiConnectionTimeout & AtcaConnectionTimeout in ms
IpmiConnectionTimeout = "10000"
AtcaConnectionTimeout = "5000"
EnableSelOnAll = "1"
AtcaPollAliveMCs = "1"
MC20 = "initial_discover poll_alive poll_dead"
}
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Openhpi-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openhpi-devel
