Pierre,
thank you very much for your quick reply.
I've applied the patch to OpenHPI 2.10.0 and it "almost" seems to fix the
issue, please see attached file:
When I start openhpid and run hpitop, I will see the correct topology
immediately after the initial discovery.
However when I run hpitop (or some other tool, e.g. hpiview) for a second time,
the FRUs have vanished again.
Kind regards,
Thomas
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
> Behalf Of Pierre Sangouard
> Sent: Monday, November 12, 2007 10:09 AM
> To: [email protected]
> Subject: Re: [Openhpi-devel] MTCA SHM+MCH - only seeing SHM
> with ipmidirect
>
>
> Please try the attached patch on 2.10.0 and let me know how it goes.
>
> Pierre
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:openhpi-devel- [EMAIL PROTECTED] On Behalf Of
> > Thomas.Kastner
> > Sent: Monday, November 12, 2007 10:02
> > To: [email protected]
> > Subject: [Openhpi-devel] MTCA SHM+MCH - only seeing SHM with
> > ipmidirect
> >
> > Hello,
> >
> > we have designed a MCH based on the MCMC+uSHM solution from
> PigeonPoint.
> > I've successfully used OpenIPMI (using RCMP connection) for
> some time
> > and am now in the process of setting up OpenHPI with
> ipmidirect plugin.
> >
> > The problem I'm having when using ipmidirect is that in the
> topology
> > view I only see the uSHM, but no devices behind it:
> > top ver 0.2 HPI-B
> > Hpi Version 131585 Implemented.
> >
> >
> > {SYSTEM_CHASSIS,7}
> > |
> > +--- {SYSTEM_CHASSIS,7}{SHELF_MANAGER,0}{SWITCH_BLADE,0}
> > | |__ Sensor Num: 0, Type: OEM_SENSOR, Category:
> > SENSOR_SPECIFIC, Tag: Hot Swap ShMM
> > | |__ Inventory Idr Num: 0, Num Areas:
> 3, Tag: Company
> > ShMM
> > |
> > End of {SYSTEM_CHASSIS,7}
> >
> > >From the log it seems that the MCH is not responding to the "Get
> > >Address
> > Info" command as expected by OpenHPI, but on the other hand
> I see that
> > the modules get detected later.
> >
> > I would be very thankful if someone could have a look at
> the log file
> > and point me in the right direction. I've spent some time
> reading the
> > source code, documentation and mailing lists but still am kind of
> > stuck. Any help that gets me started in the right direction
> would be highly appreciated.
> >
> > Please note that I had to shorten the log so it is small enough for
> > the mailing list - I'd be glad to forward the log to anyone
> who's interested.
> >
> > Kind regards,
> > Thomas Kastner
>
VM-DEBIAN:/home/labuser/openhpi-2.10.0/openhpid# hpitop
hpitop ver 0.2 HPI-B
Hpi Version 131585 Implemented.
{SYSTEM_CHASSIS,7}
|
+--- {SYSTEM_CHASSIS,7}{SHELF_MANAGER,0}{SWITCH_BLADE,0}
| |__ Sensor Num: 0, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
Hot Swap ShMM
| |__ Inventory Idr Num: 0, Num Areas: 3, Tag: Company ShMM
|
+--- {SYSTEM_CHASSIS,7}{PHYSICAL_SLOT,1}{SWITCH_BLADE,1}
| |__ Sensor Num: 0, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
Hot Swap CM
| |__ Sensor Num: 27, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
IPMB Physical
| |__ Sensor Num: 30, Type: RESERVED2, Category: SENSOR_SPECIFIC, Tag:
BMC Watchdog
| |__ Sensor Num: 22, Type: VOLTAGE, Category: THRESHOLD, Tag: +12.0V
| |__ Sensor Num: 23, Type: VOLTAGE, Category: THRESHOLD, Tag: +5.0V
| |__ Sensor Num: 24, Type: VOLTAGE, Category: THRESHOLD, Tag: +3.3V
| |__ Sensor Num: 25, Type: VOLTAGE, Category: THRESHOLD, Tag: +1.2V
| |__ Sensor Num: 26, Type: VOLTAGE, Category: THRESHOLD, Tag: +1.5V
| |__ Sensor Num: 31, Type: (null), Category: SENSOR_SPECIFIC, Tag:
Version change
| |__ Sensor Num: 19, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
Hot Swap MCH 1
| |__ Sensor Num: 28, Type: TEMPERATURE, Category: THRESHOLD, Tag: 1st
DS75 Temp
| |__ Sensor Num: 29, Type: TEMPERATURE, Category: THRESHOLD, Tag: 2nd
DS75 Temp
| |__ Control Num: 0, Type: OEM, Output Type: LED, Tag: Blue LED
| |__ Control Num: 1, Type: OEM, Output Type: LED, Tag: LED 1
| |__ Control Num: 2, Type: OEM, Output Type: LED, Tag: LED 2
| |__ Control Num: 3, Type: OEM, Output Type: LED, Tag: LED 3
| |__ Inventory Idr Num: 3, Num Areas: 3, Tag: aMCH
|
+--- {SYSTEM_CHASSIS,7}{PHYSICAL_SLOT,1}{POWER_SUPPLY,1}
| |__ Sensor Num: 15, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
Hot Swap PM 1
| |__ Sensor Num: 32, Type: TEMPERATURE, Category: THRESHOLD, Tag:
Temperature 1
| |__ Sensor Num: 33, Type: TEMPERATURE, Category: THRESHOLD, Tag:
Temperature 2
| |__ Control Num: 0, Type: OEM, Output Type: LED, Tag: Blue LED
| |__ Control Num: 1, Type: OEM, Output Type: LED, Tag: LED 1
| |__ Control Num: 2, Type: OEM, Output Type: LED, Tag: LED 2
| |__ Control Num: 3, Type: OEM, Output Type: LED, Tag: LED 3
| |__ Inventory Idr Num: 50, Num Areas: 1, Tag: Ericsson AB PM
|
+--- {SYSTEM_CHASSIS,7}{PHYSICAL_SLOT,1}{COOLING_UNIT,1}
| |__ Sensor Num: 13, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
Hot Swap CU 1
| |__ Sensor Num: 37, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
IPMB Physical
| |__ Sensor Num: 38, Type: VOLTAGE, Category: THRESHOLD, Tag: +3.3V
| |__ Sensor Num: 39, Type: VOLTAGE, Category: THRESHOLD, Tag: +12V
| |__ Sensor Num: 40, Type: VOLTAGE, Category: THRESHOLD, Tag: +12V Reg
| |__ Sensor Num: 41, Type: TEMPERATURE, Category: THRESHOLD, Tag: LM75
Temp
| |__ Sensor Num: 42, Type: FAN, Category: THRESHOLD, Tag: Fan 1
| |__ Sensor Num: 43, Type: FAN, Category: THRESHOLD, Tag: Fan 2
| |__ Sensor Num: 44, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
Telco Alarm
| |__ Control Num: 0, Type: OEM, Output Type: LED, Tag: Blue LED
| |__ Control Num: 1, Type: OEM, Output Type: LED, Tag: LED 1
| |__ Control Num: 2, Type: OEM, Output Type: LED, Tag: LED 2
| |__ Control Num: 5120, Type: ANALOG, Output Type: FAN_SPEED, Tag: Fan
Control
|
+--- {SYSTEM_CHASSIS,7}{PHYSICAL_SLOT,1}{ALARM_MANAGER,0}
| |__ Sensor Num: 21, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
Hot Swap Telco
| |__ Control Num: 0, Type: OEM, Output Type: LED, Tag: Blue LED
| |__ Control Num: 1, Type: OEM, Output Type: LED, Tag: LED 1
| |__ Control Num: 2, Type: OEM, Output Type: LED, Tag: LED 2
| |__ Control Num: 5120, Type: ANALOG, Output Type: FAN_SPEED, Tag: Fan
Control
|
+--- {SYSTEM_CHASSIS,7}{PHYSICAL_SLOT,1}{COOLING_UNIT,2}
| |__ Sensor Num: 14, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
Hot Swap CU 2
| |__ Sensor Num: 45, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
IPMB Physical
| |__ Sensor Num: 46, Type: VOLTAGE, Category: THRESHOLD, Tag: +3.3V
| |__ Sensor Num: 47, Type: VOLTAGE, Category: THRESHOLD, Tag: +12V
| |__ Sensor Num: 48, Type: VOLTAGE, Category: THRESHOLD, Tag: +12V Reg
| |__ Sensor Num: 49, Type: TEMPERATURE, Category: THRESHOLD, Tag: LM75
Temp
| |__ Sensor Num: 50, Type: FAN, Category: THRESHOLD, Tag: Fan 1
| |__ Sensor Num: 51, Type: FAN, Category: THRESHOLD, Tag: Fan 2
| |__ Control Num: 0, Type: OEM, Output Type: LED, Tag: Blue LED
| |__ Control Num: 1, Type: OEM, Output Type: LED, Tag: LED 1
| |__ Control Num: 2, Type: OEM, Output Type: LED, Tag: LED 2
| |__ Control Num: 5120, Type: ANALOG, Output Type: FAN_SPEED, Tag: Fan
Control
|
End of {SYSTEM_CHASSIS,7}
VM-DEBIAN:/home/labuser/openhpi-2.10.0/openhpid# hpitop
hpitop ver 0.2 HPI-B
Hpi Version 131585 Implemented.
{SYSTEM_CHASSIS,7}
|
+--- {SYSTEM_CHASSIS,7}{SHELF_MANAGER,0}{SWITCH_BLADE,0}
| |__ Sensor Num: 0, Type: OEM_SENSOR, Category: SENSOR_SPECIFIC, Tag:
Hot Swap ShMM
| |__ Inventory Idr Num: 0, Num Areas: 3, Tag: Company ShMM
|
End of {SYSTEM_CHASSIS,7}
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Openhpi-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openhpi-devel
