As of now, there is no way to find out the blade NIC (MAC) information using openhpi from HP blade enclosure (C-7000). A sample application in the debug directory gets the NIC information using a direct soap call.
Mohan On Tue, 2011-03-29 at 12:35 -0400, Preeti Sharma wrote: > Hi, > Is there a way to get NICs information of a blade using openhpi? > > Regards, > Preeti > > > > ------------------------------------------------------------------------------ > Enable your software for Intel(R) Active Management Technology to meet the > growing manageability and security demands of your customers. Businesses > are taking advantage of Intel(R) vPro (TM) technology - will your software > be a part of the solution? Download the Intel(R) Manageability Checker > today! http://p.sf.net/sfu/intel-dev2devmar > _______________________________________________ > Openhpi-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/openhpi-devel ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Openhpi-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openhpi-devel
