On Tue, 2004-11-16 at 12:42, Sean Hefty wrote: > Hal Rosenstock wrote: > > > Hi, > > > > I have a patch which I think fixes the SMI issues for an end node. There > > is more to be done for switch support but this hopefully is sufficient > > for SM support. Can you please validate it before I check it in ? I'm a > > little gun shy about breaking the tree after last week's debacle. If it > > works in your configurations, I will check it in. > > I applied the patch to my local repository, and it worked fine.
Thanks for checking this out. > One item of note is that my test system is connected into a switched > fabric with opensm running on the source forge stack. When I load the > openib stack, the port goes to INIT. It doesn't go to ACTIVE until I > unplug and re-insert the cable. This is true with or without this > patch. (I'm connected to a 16-port Mellanox switch.) The systems > running the source forge stack do not see this issue. Can you see whether any packets received make it to ib_mad_recv_done_handler when the port stays in INIT ? It seems weird that a cable reinsertion would bring it back to life. Sounds like some sort of initialization issue that gets fixed on a cable reinsertion. Is this reproducible every time or intermittent ? -- Hal > > - Sean _______________________________________________ openib-general mailing list [EMAIL PROTECTED] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
