>I'm following the FAQ pretty closely and IPoIB is still not working for >me. I'm using the latest from SVN (as of tonight). These are PCIe HCAs >with 4.5.3 firmware (x86_64 MST is horribly broken BTW --can't wait for >tvflash). Hardware/cabling is fine since things work under VAPI 3.2. >All modules are loaded, and syslog doesn't show anything. It seems now >(new with 4.5.3 FW) that packets are flowing one direction but not the >other. Here's as much debug info as I could dig up.
Ok here is what I found. I installed the openib.org code on my EM64T (x86_64) systems that have PCI-E HCAs. We have a 8 node Mellanox switch. On one node (a 32-bit Xeon node), we are running opensm from the SF project. We have one 32-bit system (Sean's) and 2 EM64T systems connected to the switch that are running the openib.org code. When Sean's 32-bit system loads ipoib and configures the interface, everything seems to work fine. However, when I load ipoib on the 64-bit x86_64 node, the opensm starts complaining that osm_mcr_rcv_join_mgrp ERR IB10 Provided Join State != FullMember so it looks like the x86_64 system is not able to join the multicast group. I suspect some issue with structure definitions, but have not debugged the issue any further. Any ideas ? _______________________________________________ openib-general mailing list [EMAIL PROTECTED] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
