Quoting r. Robert Pearson <[EMAIL PROTECTED]>: > Subject: RE: [openib-general] Re: Disabling IRQ #201 message > > Michael, > > I ran an experiment where I rebooted the machine, waited for an hour and > then looked at /var/log/messages which I copy below. OpenSM is not > running and IPoverIB is not loaded. The dropped interrupt occurs about > 30 minutes after the reboot. I do not know what if anything is causing > activity in the HCA. Port 1 is cabled to an unmanaged switch but stuck > in INIT state since there is no running SM. > > I was mistaken about the machine. We have two dual Opteron machines, but > this one is an AMD engineering machine, not the NewIsys machine. > > There is a message below about some device that does not call > pci_enable_device() which may be interesting.
Roland here claims its a board/BIOS issue at your end. Try to remove the HCA and put another card in the slot (btw , is it pci-x or express?) If you decide its a board/BIOS issue, try with my patch as a work-around. -- MST - Michael S. Tsirkin _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
