Libor, Ignore this patch. I'll submit a different one to change the ib_ucm device node from /dev/infiniband/cm to /dev/infiniband_cm. This makes the udev setup unnecessary.
And, this probably wasn't the right README file for the udev rules anyway. They belong with the module, not with the library, as pointed out by Tom. On 6/2/05, Bill Jordan <[EMAIL PROTECTED]> wrote: > Patch to add basic content to the CM library > README file. Add build instructions, install > directory, and device node configuration. > > Signed-off-by: Bill Jordan <[EMAIL PROTECTED]> > > Index: README > =================================================================== > --- README (revision 2523) > +++ README (working copy) > @@ -0,0 +1,27 @@ > +This README is for userspace cm library. > + > +Building > + > +To make this directory, run: > +./autogen.sh && ./configure && make && make install > + > +Typically the autogen and configure steps only need be done the first > +time unless configure.in or Makefile.am changes. > + > +Libraries are installed by default at /usr/local/lib/infiniband. > + > +Device files > + > +The userspace CM uses a single device file regardless of the number > +of adapters or ports present. > + > +To create the appropriate character device file automatically with > +udev, a rule like > + > + KERNEL="ucm", NAME="infiniband/%k", MODE="0666" > + > +can be used. This will create the device node named > + > + /dev/infiniband/ucm > + > + > _______________________________________________ > openib-general mailing list > [email protected] > http://openib.org/mailman/listinfo/openib-general > > To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general > -- Bill Jordan SilverStorm Technologies _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
