On Tue, 6 Sep 2005, Michael S. Tsirkin wrote:
> For mellanox cards you can usually figure that our by the board id, > which is reported by running "mstflint -d <device> q" > or by looking at board id in /sys/class/infiniband/mthcaX/board_id What if my board ID doesn't match any of the *.brd file names? # cat /sys/class/infiniband/mthca0/board_id MT_0030000001 # ./mstflint -d `lspci -d 15b3:5a44 | cut -f 1 -d ' '` q Image type: FailSafe Chip rev.: A1 GUID Des: Node Port1 Port2 Sys image GUIDs: 0002c90200003098 0002c90200003099 0002c9020000309a 0002c9020000309b Board ID: (MT_0030000001) > ls -1 fw-23108-rel-3_3_3/*.brd fw-23108-rel-3_3_3/MHX-CE128-T.brd fw-23108-rel-3_3_3/MHX-CE256-T.brd fw-23108-rel-3_3_3/MHX-CE512-T.brd fw-23108-rel-3_3_3/MHXL-CF128-T.brd fw-23108-rel-3_3_3/MHXL-CF256-T.brd fw-23108-rel-3_3_3/MTLP23108_jaguar.brd I know that it is a MHXL-CF128-T though. Is it safe to upgrade with that board file? _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
