On Sat, Sep 24, 2005 at 02:58:10PM +0800, QiWang, Chen wrote: > Hi, grant > > On node c01-14, I installed openib-gen2, kernel 2.6.13.2 > but I have IRQ problem.
Yes, I'm not surprised. > ----------------------------------- > > ib_mthca: Mellanox InfiniBand HCA driver v0.06 (June 23, 2005) > ib_mthca: Initializing (0000:03:00.0) > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 51 (level, low) -> IRQ 201 The firmware (ACPI) in c01-14 says to use "201". The other blades that work (e.g. c01-01) use IRQ 193. Ask your HW/FW supplier why the difference in IRQ assignment. grant > ib_mthca 0000:03:00.0: Found bridge: (0000:02:01.0) > ib_mthca 0000:03:00.0: FW version 000300030003, max commands 64 > ib_mthca 0000:03:00.0: FW size 6143 KB (start e7a00000, end e7ffffff) > ib_mthca 0000:03:00.0: HCA memory size 131071 KB (start e0000000, end > e7ffffff) > ib_mthca 0000:03:00.0: Max QPs: 16777216, reserved QPs: 1024, entry > size: 256 > ib_mthca 0000:03:00.0: Max SRQs: 1024, reserved SRQs: 16, entry size: 32 > ib_mthca 0000:03:00.0: Max CQs: 16777216, reserved CQs: 128, entry size: > 64 > ib_mthca 0000:03:00.0: Max EQs: 64, reserved EQs: 1, entry size: 64 > ib_mthca 0000:03:00.0: reserved MPTs: 16, reserved MTTs: 16 > ib_mthca 0000:03:00.0: Max PDs: 16777216, reserved PDs: 0, reserved > UARs: 1 > ib_mthca 0000:03:00.0: Max QP/MCG: 16777216, reserved MGMs: 0 > ib_mthca 0000:03:00.0: Flags: 00370347 > ib_mthca 0000:03:00.0: profile[ 0]--10/20 @ 0x e0000000 (size 0x > 4000000) > ib_mthca 0000:03:00.0: profile[ 1]-- 0/16 @ 0x e4000000 (size 0x > 1000000) > ib_mthca 0000:03:00.0: profile[ 2]-- 7/18 @ 0x e5000000 (size 0x > 800000) > ib_mthca 0000:03:00.0: profile[ 3]-- 9/17 @ 0x e5800000 (size 0x > 800000) > ib_mthca 0000:03:00.0: profile[ 4]-- 3/16 @ 0x e6000000 (size 0x > 400000) > ib_mthca 0000:03:00.0: profile[ 5]-- 4/16 @ 0x e6400000 (size 0x > 200000) > ib_mthca 0000:03:00.0: profile[ 6]--12/15 @ 0x e6600000 (size 0x > 100000) > ib_mthca 0000:03:00.0: profile[ 7]-- 8/13 @ 0x e6700000 (size 0x > 80000) > ib_mthca 0000:03:00.0: profile[ 8]--11/11 @ 0x e6780000 (size 0x > 10000) > ib_mthca 0000:03:00.0: profile[ 9]-- 2/10 @ 0x e6790000 (size 0x > 8000) > ib_mthca 0000:03:00.0: profile[10]-- 6/ 5 @ 0x e6798000 (size 0x > 800) > ib_mthca 0000:03:00.0: HCA memory: allocated 106082 KB/124928 KB (18846 > KB free) > ib_mthca 0000:03:00.0: Allocated EQ 1 with 65536 entries > ib_mthca 0000:03:00.0: Allocated EQ 2 with 128 entries > ib_mthca 0000:03:00.0: Allocated EQ 3 with 128 entries > ib_mthca 0000:03:00.0: Setting mask 00000000000f43fe for eqn 2 > ib_mthca 0000:03:00.0: Setting mask 0000000000000400 for eqn 3 > ib_mthca 0000:03:00.0: NOP command failed to generate interrupt (IRQ > 201), aborting. > ib_mthca 0000:03:00.0: BIOS or ACPI interrupt routing problem? > ib_mthca 0000:03:00.0: Clearing mask 00000000000f43fe for eqn 2 > ib_mthca 0000:03:00.0: Clearing mask 0000000000000400 for eqn 3 > ACPI: PCI interrupt for device 0000:03:00.0 disabled > ib_mthca: probe of 0000:03:00.0 failed with error -16 > ----------------------------------- > > > On Thu, 2005-09-22 at 11:29 -0700, Grant Grundler wrote: > > > On Thu, Sep 22, 2005 at 05:22:58PM +0800, QiWang, Chen wrote: > > > Hi , > > > I install openib gen2 on c01-14, kernel=2.6.13 > > > But I do not know how it works. > > > > See the openib-gen2/README.kernel-build for directions on > > how to build+install the kernel drivers. > > > > See the openib.org wiki for userspace instructions: > > https://openib.org/tiki/tiki-index.php > > > > If something is wrong or not clear, please ask on the openib-general > > mailing list. > > > > > > grant > > -- > QiWang, Chen <[EMAIL PROTECTED]> > Clustars Supercomputing Technology corp. > http://www.Clustars.CN > TEL:+86-0816-2546345-815 > FAX:+86-0816-2546370 > Mobile:+86-13096497499 _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
