|
I’m trying to get an OpenIB system connected via SRP
Initiator to an SRP Target on a SilverStorm 7000 Vfx switch. When I try
to detect the SRP initiator through the switch it doesn’t show up.
Is there anything else that I need to do to get the switch to see the initiator
besides modprobe ib_srp? You can see what’s happening from the output below,
which I believe is being caused by there being no map in the 7000. I
haven’t tried adding it manually yet, but I’m curious why it doesn’t
auto-detect… thanks [EMAIL PROTECTED] bin]# ./dmcli -t
/sys/class/infiniband/mthca0/ports/1 -d /dev/infiniband/umad0 3 IO Unit Info: max controllers: 2 controller[ 1] GUID:
00066a013800017a vendor ID: 066a00 device ID: 000038
ID: Chassis 0x00066A0050000101,
Slot 1, IOC 1 service entries: 1 service[
0]: 0000494353535250 / SRP.T10:0000000000000001 controller[ 2] GUID:
00066a023800017a vendor ID: 066a00 device ID: 000038
ID: Chassis 0x00066A0050000101,
Slot 1, IOC 2 service entries: 1 service[
0]: 0000494353535250 / SRP.T10:0000000000000001 [EMAIL PROTECTED] bin]# echo
id_ext=0000000000000001,ioc_guid=00066a013800017a,dgid=fe80000000000000000 66a013800017a,pkey=ffff,service_id=0000494353535250 >
/sys/class/infiniband_srp/srp-mthca0-1/add_ta Rget [EMAIL PROTECTED] bin]# tail /var/log/messages Feb 20 16:05:39 linux14 kernel: ib_srp: Got failed path rec
status -22 Feb 20 16:05:39 linux14 kernel: ib_srp: Path record query
failed Feb 20 16:05:39 linux14 kernel: ib_srp: Connection failed |
_______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
