Hi Suri, On Sat, 2006-03-04 at 18:52, Suresh Shelvapille wrote: > Folks: > > Two commercial switches are connected to each other via two of our devices > (which act like switches).
Is there one link between each switch ? > One HCA is connected to each of the commercial > switches. Upon power up, everything is normal and when I ping Is this (IPoIB) ping you are referring to ? > one HCA from the other everything is fine. > When everything is operational, if I move one of the HCAs from one switch > port to another on the same switch, then the pings start to take an enormous > amount of time.... but they work ? > When a port move happens, is there some SMP sent from the SM(the SM is on > the commercial switch) which we may not be handling in our device, which > could be causing this delay? There are a number of SMs which need to be sent including changes in the MFT. -- Hal > Thanks, > Suri > > > _______________________________________________ > openib-general mailing list > [email protected] > http://openib.org/mailman/listinfo/openib-general > > To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
